MATORRO JAGDTIGER CONVERSION

[c.rainford73]

Herman I have been dealing with the same thing. To me it is very confusing. Everything is wired as it should be. The only thing left is the possibility that we use the same recoil and gun mechanisms as the t90? Hang in there mr Herman

[B_Man]

Are you getting any movement from the elevation motor? When the wiring was wrong on mine the elevation worked but recoil didn't.
Otherwise I would suggest checking the soldered points and dusting off the multimeter if you have one.

I feel your pain, mine experience was a frustrating one but they are reliable when they are wired up right.

[HERMAN BIX]

Are you getting any movement from the elevation motor?

Nothing.
Getting some movement on Ebay very directly I can tell ya.

[c.rainford73]

Are you getting any movement from the elevation motor?

Nothing.
Getting some movement on Ebay very directly I can tell ya.

Herman is the traverse motor doing anything that plugs directly into the upper hull board from Haya? . The turret rotation is not needed in your jagdtiger but plug one into the correct corresponding port on the haya plug and test if you haven't done so already

[B_Man]

I just noticed your plug has an extra socket to the one I'm using. You might have checked this but on mine I have the two black wires connected to the pins that run to the blue and yellow wires and the red goes to orange (I think it's orange or maybe light brown, I'm a bit colour blind but its the one next to yellow).

[c.rainford73]

If that works you can possibly use that point on the connector to energize one of the other motors that aren't working...

[c.rainford73]

If that works you can possibly use that point on the connector to energize one of the other motors that aren't working...

Here's the actual t90 setup in my Tiger I. This is exactly the way I bought it hope this helps.

[c.rainford73]

Also in the T90 into tiger I thread there is a bunch more pictures and stuff

[jackalope]

Herman after all these pages of electronic nightmare have you considered just getting the wiring from a Torro Jagdtiger? Do you need me to open mine up for you and send you detailed pics? I can text them to you if you'd like. Also I think I still have the factory instructions which I believe cones with a parts list to order replacement parts should any factory stuff break. If it does you can order the exact bits you should need.

Real sorry I hadn't thought of this before.

[HERMAN BIX]

Herman after all these pages of electronic nightmare have you considered just getting the wiring from a Torro Jagdtiger? Do you need me to open mine up for you and send you detailed pics? I can text them to you if you'd like. Also I think I still have the factory instructions which I believe cones with a parts list to order replacement parts should any factory stuff break. If it does you can order the exact bits you should need.

Real sorry I hadn't thought of this before.

Cheers mate, but I really want to have a nice sounds that the new HL electronics offer without the (perceived) hassle of setting up & maintaining an elmod or IBU etc etc.

sure isnt the simple transplant I hoped for.