sherman

[Ex_Pat_Tanker]

Torro's website call's it a Mato
The Matorro brand is only applied to the Trumpeter RC stuff :~

[STEINER]

bubbajoexx, I'm really sorry for you mate. Your disappointment shows through in your posts and understandably so.

Your to be commended for coming out with an immediate review of this Sherman. Your going to save a lot of us money, because a lot of people will steer clear of this tank and I'm one of them.

Very disappointing.

STEINER.

[creepingdeathrc]

do you have a pic on how the bogey sysem is attatched to the hull? the reason i asked is because before mato/hl decided to commit to an m4 project we were working on our own sherman project. I wonder if our vvss would be able to work with the tracks, idler and drive sprockets. you mentioned the tracks were too wide, so they are not to true scale? are the bogies just a one or two screw bolt on?

[bubbajoexx]

shame really,

odd about the manufactorer.. that link says Torro in the picture!! O.O O.O ! !

cheers,

Matt

ITS CALLED REBOXING SOMEONE ELTSE MAKES IT THEN THEY PUT IT INTO THERE OWN BOX AND MATORRO IS AN ACRONIM MATO AND TORRO COMBINED

[bubbajoexx]

do you have a pic on how the bogey sysem is attatched to the hull? the reason i asked is because before mato/hl decided to commit to an m4 project we were working on our own sherman project. I wonder if our vvss would be able to work with the tracks, idler and drive sprockets. you mentioned the tracks were too wide, so they are not to true scale? are the bogies just a one or two screw bolt on?

IF YOU ARE FAMILLIAR WITH fov THEY MOUNT THE SAME WAY WITH A SLOT IN THE HULL THE BOGIE SLIDES INTO IT THEN A U SHAPED CLIP SLIDES OVER THE TAB INSIDE THE TANK AND HELD ON WITH 2 SCREWS

[fleshpedler]

I am as sad as everbody else is, so think that i will just stick with the covers on mine, and now move on too something else.....
This sure will be a talking bit at the Lutton event this weekend.................,
Fleshy....................

[creepingdeathrc]

yes familar with the fov sherman. to me it seems like a interesting problem. but i think it could be overcome. even though i swore against and at the mato line of rc tanks, it will need a little more investigation.

[BREL]

I was going to get a Matorro sherman to build a barv out of it, but having had a look at Joe's pictures and the extra work that needs to be done to the gearcase cover and the susspension . I don't think I will bother. may have a look for a second hand Tamiya Sherman on ebay to do the job even though it has HVSS instead of VVSS

[Viper]

The Box looks nice lol

[[ICE]monkey]

sorry about your sherman, but its made my mind up , think i will go for the panther
regards, cliff