Page 3 of 6
Re: M48 AVLB 1:87
Posted: Wed Dec 25, 2024 6:59 pm
by Herr Dr. Professor
Almarza, your post, two up, makes a good point and is in your favored scale.
Re: M48 AVLB 1:87
Posted: Wed Dec 25, 2024 7:37 pm
by Almarza
Re: M48 AVLB 1:87
Posted: Fri Dec 27, 2024 8:36 am
by Almarza
The bridge support is now in place, all motors are now controlled by radio control.
- IMG_20241227_094658.jpg (860.36 KiB) Viewed 984 times
Re: M48 AVLB 1:87
Posted: Fri Dec 27, 2024 1:28 pm
by Ecam
Continues to amaze! I'd bet if you did a 16th you'd need a 30 channel system so not only would the hatches be RC'd, one of the crewmen would make coffee/tea.
Re: M48 AVLB 1:87
Posted: Fri Dec 27, 2024 6:48 pm
by Almarza
Ecam wrote: ↑Fri Dec 27, 2024 1:28 pm
Continues to amaze! I'd bet if you did a 16th you'd need a 30 channel system so not only would the hatches be RC'd, one of the crewmen would make coffee/tea.
I might make something bigger in the future, but I don't know if it will be bigger than 1:35... we're going to have a hard time making tea...
Re: M48 AVLB 1:87
Posted: Sun Dec 29, 2024 8:18 pm
by Almarza
- IMG_20241229_212524.jpg (1.94 MiB) Viewed 938 times
Getting started with painting...
Re: M48 AVLB 1:87
Posted: Sun Dec 29, 2024 8:21 pm
by Exhibitedbrute
Just how
Re: M48 AVLB 1:87
Posted: Sun Dec 29, 2024 9:29 pm
by HERMAN BIX
Re: M48 AVLB 1:87
Posted: Fri Jan 03, 2025 10:32 pm
by Almarza
Re: M48 AVLB 1:87
Posted: Fri Jan 03, 2025 10:35 pm
by Almarza
Almost completed...
All that remains is to install the mechanism inside the bridge, the vehicle is practically finished.
- IMG_20250103_233635.jpg (408.78 KiB) Viewed 880 times
- IMG_20250103_234934.jpg (473.34 KiB) Viewed 875 times
