RC Tank Warfare community hobby forum

forgebear wrote:https://www.youtube.com/watch?v=jn6Z8xi ... w42tqX-SWk
the sounds here are first heng long then Clark chally

That is awesome. We rebuild CV12 engines (and CV8) here in Shrewsbury. I really want mine to sound like a CV12 and not some generic diesel


Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder

Only thing with a Clark board, your Heng Long transmitter isn't compatible.

go for the Clark board then it will be the best way and not to much work to get it going

Son of a gun-ner wrote:Only thing with a Clark board, your Heng Long transmitter isn't compatible.

Ah right.. to be taken into account thanks..


Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder

your welcome

Turns out the Tank Main Board is V5.2
and the Transmitter Board is 5.5


Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder

looking at the picture of that board it looks like one of the drive fetes is burnt

forgebear wrote:looking at the picture of that board it looks like one of the drive fetes is burnt

You lost me at Drive Fetes


Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder

I think that should read FETs, not fetes. FET=field effect transistor, if I remember correctly. I also think, if you look at your photo, the second from the right of the 4 black square things (FETS) at the top looks discoloured. At this point I will stop, as my limited electronics knowledge is rathe aged.

Prime opportunity to shop for new electronics and radio Your thank will tank you.