RC Tank Warfare community hobby forum

will e-mail bill and ask him

RC Command shows only there Battle System now no DBC or DBCRC2 at all .

Jimmy

Well, The Blitz was assembling the DBC units for Bill so I'm not suprised his supply has dried up...

Hi Nick I would give it one more go with a cooled board ,If you need a fan I have one that will fit I have fitted them to my Rx 18 boards ,I know your going on Hoilday this week so have a nice time and chill out ,then we will get to the bottom of this .

  regards pete

Is their any new information on the system problem's?

Hi Gents,
Just back from our break in Hampshire.
No news yet on any problem fixes. Bill RCCommand has sent me 2 new I.c. chips for the battle boards. I've emailed him to advise me on what to do next. I have 1 remaining V 2.0 system that is untried and 1 unmelted Stug III.
At the moment Gentlemen it seems to be a War of Attrition and I'm quickly running out of serviceable armour. So I hope I get some help soon.

Best regards,

Nick.

Not that I am mercenary or anything, but about that Stug....

Been having chat's with Rob fv432 about possible mis-wiring and other problems that might throw some light on the complete lack of success I'm having with these systems.

Here's a pic that Bubbajoe sent to help with the wiring,

And another one showing Pin orientation. I hope that helps Rob.

p.s. I took the rx-18 case apart and it all looks very burnt in there.

Hi Nick Do you want a fan to cool the rx18 board if you do can have it in the post tommorrow they are easy to fit and should stop the board burning up .

regards pete

Thanks Pete. That makes a lot of sense. Where would I wire it in...directly to the RX18 board ?