Page 3 of 3
Re: Pershing lack of speed
Posted: Sat Jun 20, 2009 10:00 pm
by Tackleberry
Hi wibblywobbly
I got some of those motors and your right there fine I've been running them hard just to see what happens
i would recommend them as well
Tackleberry
Re: Pershing lack of speed
Posted: Sun Jun 21, 2009 1:55 pm
by philipat
Yep...planning to put the fans in before I use a 480. I've seen a lot of posts about blown boards from tanks without fans.
Wibbly, I'd love to see the comparison video.
Re: Pershing lack of speed
Posted: Sun Jun 21, 2009 2:21 pm
by fv432
another option for cooling the boards especially the rx18 is to remove the fet board and put it on fly leads and stick it between 2 bits of ally or better copper to remove heat
this mod is very similar if not the same as nigelderenglanders original "umbilicle" method for the Rx 13s
hope to try it myself shortly on my tiger build using an rx18
Re: Pershing lack of speed
Posted: Mon Jun 22, 2009 3:10 am
by philipat
Rob,
Take pictures, please, and give a detailed how-to. That was entirely Greek to me.
Philip