Page 3 of 3
Re: Gluing resin parts
Posted: Tue Jan 09, 2018 5:21 pm
by gisalook
Hi guys.
I use loctite 401 on just about everything. I use it on my 3d printed stuff (PLA) and everything in between.
Re: Gluing resin parts
Posted: Tue Jan 09, 2018 5:52 pm
by PainlessWolf
Good morning, 43rdR&R,
Thank you for finding the test results video. It illustrates why I have enjoyed the use of the LocTite Ultra Control Gel over the years it has been available. I have not lost a part to shear yet, plastic to plastic or plastic to brass or resin. The longer the stuff is applied, the stronger it gets. Until plastic starts breaking. With the 1/16 scale , smaller or larger parts and pieces that we use in the Hobby, the LocTite is a great choice.
regards as always,
Painless
Re: Gluing resin parts
Posted: Tue Jan 09, 2018 11:55 pm
by 43rdRecceReg
PainlessWolf wrote:Good morning, 43rdR&R,
Thank you for finding the test results video. It illustrates why I have enjoyed the use of the LocTite Ultra Control Gel over the years it has been available. I have not lost a part to shear yet, plastic to plastic or plastic to brass or resin. The longer the stuff is applied, the stronger it gets. Until plastic starts breaking. With the 1/16 scale , smaller or larger parts and pieces that we use in the Hobby, the LocTite is a great choice.
regards as always,
Painless
Thanks, Painless.

I use Loctite gel for domestic breakages, and it doesn't disappoint, unlike a bunch of other superglues I've tried. Loctite Ultra Gel Control Super Glue is available in the UK, though I'd not seen it before. Curiosity suitably tweaked, I shall test it out the next time I need a superglue. Your confidence in the properties of the product is recommendation enough.....

My Stug IV project is a likely candidate.
Here's what Loctite claim it can bond..for any member keen to give a try:
"....Recommended For
Repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
Ideal for vertical surfaces and for applications requiring flexibility
Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglas™, polycarbonate, polystyrene and PVC...."
In an emergency, it can probably be used to reattach the finger tip your craft knife just sliced off

Re: Gluing resin parts
Posted: Wed Jan 10, 2018 12:36 am
by Max-U52
Roy, if you're going to experiment you might want to check storage recommendations. I keep my loctite 435 and 410 in the fridge, per manufacturers recommendation.
Re: Gluing resin parts
Posted: Wed Jan 10, 2018 3:31 pm
by Norton1
Kind of funny Recce43rd as superglue was originally developed as a battlefield expedient for closing wounds.
Be well,
Steve
Re: Gluing resin parts
Posted: Wed Jan 10, 2018 7:07 pm
by 43rdRecceReg
Norton1 wrote:Kind of funny Recce43rd as superglue was originally developed as a battlefield expedient for closing wounds.
Be well,
Steve
Yep. Wars certainly boost creative and lateral thinking, Steve. 1939-45 saw us go from the Biplane to wire-guided missiles (Germans) and V2 rockets (them again

).
When I had my mashed-up ankle rebuilt with titanium two years ago, ordinary stitches weren't sufficient to hold the gruesome 6 inch incision in place on their own. No, they used a fair dollop of superglue too.
Had I been conscious at the time, I might have asked what brand they used

Luckily, I was well out of it....

Re: Gluing resin parts
Posted: Wed Jan 10, 2018 7:49 pm
by jarndice
Not so many years ago open heart surgery was an advance in modern medicine that was a headline event and was certain to feature on Television News,
Scroll forward to October 2016 and I was awake watching a large television screen in full colour as two stents were placed with "Surgical" Accuracy in front of two of my Heart Valves and the only incision was a tiny nick on the inside of my wrist to allow the machine entry to the artery so it could be driven remotely up the inside of my arm and into the chest cavity by the surgeon.
I am left wondering what John Logie Baird would have thought about how his invention was being used just 90 years later.
just as the inventor of superglue would probably be surprised how very differently his idea was now being used.
One invention for the entertainment industry used in the field of medicine and one invention for the field of medicine now being used in the field of entertainment.
Shaun.
Re: Gluing resin parts
Posted: Thu Jan 11, 2018 9:22 am
by Raminator
I was thankfully unconscious for the various TV shows that were filmed inside me. I do not care to see the re-runs.

Re: Gluing resin parts
Posted: Fri Jan 12, 2018 12:39 am
by 43rdRecceReg
Raminator wrote:I was thankfully unconscious for the various TV shows that were filmed inside me. I do not care to see the re-runs.

Well, we...Shaun, you Dan, and I can rejoice in not having been reduced to inanimate objects of desire for modern day Burke and Hare theatre suppliers
We have technology and sticky stuff to thank for being able to dissect tanks, and glue them back together. Long may it continue
