RC Tank Warfare community hobby forum

1...x....PZ4 DAK."..comming up

For TKCommander, all back together, though cannot test without a TX. I'll leave the hull screws off just in case the glitchy issue that appeared at the meet returns.







Sent from my phone using Fumblefingers v1.2

Thank you Jedi Master Dou-ble Glou-cester.

Do you want a working PZ4 or one for scenery?????

A working one would be great, but if not available, then one for scenery would be an acceptable substitute.

TKcommander wrote:Thank you Jedi Master Dou-ble Glou-cester.

Were you aware that one of the sprocket screws is missing? It wasn't in the bag that was inside the hull.

wibblywobbly wrote:
Were you aware that one of the sprocket screws is missing? It wasn't in the bag that was inside the hull.

No, it wasn't removed Sunday!!

My photos from the Tank meet.......

@TK

Well I never touched it, the sprocket was loose and pulled straight off, so it must have come loose and fallen out somewhere on Sunday. There was nothing holding the sprocket on. I'll see if I have a matching allen bolt.



Oooooohhhhh....luuuucky, I had one exactly the same. The one in the other side was loose as well!!

Only took today to sand, primer, and get a base coat on. Will let it dry properly overnight and do the camo tomorrow. I didn't even take the tracks off...lol.

Very nice job !!!!!!