Ibu2 start up ?

[Model Builder 4]

Changed the cables over Del, that's all that's happened is all the turret functions that were working on the left stick has all now been transferred to the right stick , still no sound or startup while holding the left stick down ?

Cheers, Lee.

[Tankbear]

If your getting no sound at all check the microSD card is inserted correctly as can sometimes self eject if a little pressure is applied.

Also check volume and speaker are connected and working, normally you should hear a little background hiss.

Ian.

[Model Builder 4]

Hi Ian, the sd card was out in the beginning so I put that in properly, the speaker is a vistron I think but I can not see a volume control plug for it, the speaker has made a sound like crackling after the gun recoil for a few seconds so there's diffinatly sound coming from it,

Cheers, Lee.

[theibuman]

From what i can see from the pictures there's no speaker or volume pot connected ....

[Model Builder 4]

Hi, this is the speaker if you follow the cable you can see where it is plugged into, there is no cable or plug for the volume though,

Cheers, Lee

uploadfromtaptalk1464462127262.jpg (99.33 KiB) Viewed 3415 times

[Tankbear]

Should be a volume pot plugged in next to the speaker socket.

[Del]

Hi, this is the speaker if you follow the cable you can see where it is plugged into, there is no cable or plug for the volume though,

Cheers, Lee

20160528_195904.jpg

Could you pop up a pic of the rx as it is now pls,just wanna check something.

[Model Builder 4]

Just took the volume lead from another tank, all the turret and gun sounds are now working fine, still can't get the bloody thing to start though, I'll have to tow it around

Lee.

[Del]

Does that tx have 5 channels? If it has have you tried the switch for that

[Model Builder 4]

Hope this pic is ok Del,

uploadfromtaptalk1464469397216.jpg (77.68 KiB) Viewed 3395 times

Cheers, Lee.