Re: Jagdpanther G2 base on Heng Long Hull
Posted: Sun Jun 11, 2017 5:17 pm
No, no. noooooo.... They are not intended to look awesome 
Ok almost awesomeSoeren wrote:No, no. noooooo.... They are not intended to look awesome
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
Jagdpanther G2 base on Heng Long Hull
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=21290
Page 16 of 32
Re: Jagdpanther G2 base on Heng Long Hull
Posted: Sun Jun 11, 2017 5:27 pm
Re: Jagdpanther G2 base on Heng Long Hull
Posted: Mon Jun 12, 2017 3:49 am
TRhos wheels are fine 
As you say, a bit of pigment or dirt on them & they will look a million bucks.
Having the tyres on them for weathering also adds to the proper look as well.
As you say, a bit of pigment or dirt on them & they will look a million bucks.
Having the tyres on them for weathering also adds to the proper look as well.
Re: Jagdpanther G2 base on Heng Long Hull
Posted: Mon Jun 12, 2017 6:44 pm
Herman, you convinced me again. Ordered various brass and wooden rods 2-3mm to make the tool handles, crank and such like. Finished the spade today. And started on the track cable to be placed around the right vent.
Re: Jagdpanther G2 base on Heng Long Hull
Posted: Wed Jun 14, 2017 8:57 pm
Slow Progress.
Did these 2 Tools since yesterday. Hammer, Axe and Boltcutter next.
Did these 2 Tools since yesterday. Hammer, Axe and Boltcutter next.
Re: Jagdpanther G2 base on Heng Long Hull
Posted: Wed Jun 14, 2017 9:02 pm
Superb work 
look full scale!
look full scale!Re: Jagdpanther G2 base on Heng Long Hull
Posted: Thu Jun 15, 2017 9:28 pm
The tiniest Progress is better than no progress at all. Reworked hammer and axe handles and now have to prepare the mounting equipment and the fake hinges for the fake Lids on the fake back boxes. Then it is painting again 
Re: Jagdpanther G2 base on Heng Long Hull
Posted: Sat Jun 17, 2017 10:27 am
Tools assembled the Wolf-Way® and primed 
The crank and rod were just primed dark yellow and will be weathered to a worn look
The wooden handles were just stained with several washes of Army Painter Dark Ink mixed with water and sanded after the 3rd or 4th application
The hammer and axe got a layer of Vallejos German dark Grey, Vallejo German Black Brown stippled in and another stippeling Action of German dark Grey to get that cast and then painted look of Basic Tools. Face of the hammer and axe cutting axe were then just sanded to give the metal appearance. Weathering will take place when mounted.
The crank and rod were just primed dark yellow and will be weathered to a worn look
The wooden handles were just stained with several washes of Army Painter Dark Ink mixed with water and sanded after the 3rd or 4th application
The hammer and axe got a layer of Vallejos German dark Grey, Vallejo German Black Brown stippled in and another stippeling Action of German dark Grey to get that cast and then painted look of Basic Tools. Face of the hammer and axe cutting axe were then just sanded to give the metal appearance. Weathering will take place when mounted.
Re: Jagdpanther G2 base on Heng Long Hull
Posted: Sat Jun 17, 2017 2:51 pm
Incredible work my friend! So much effort that is worth so much once done!
Re: Jagdpanther G2 base on Heng Long Hull
Posted: Sat Jun 17, 2017 4:37 pm
Yes. You are right, it adds a lot.
I just mounted and matched the back deck Tools, all the Pins and chains and added a machinegun. Also painted the optics. Touchups incoming when washes and filters are applied.
I just mounted and matched the back deck Tools, all the Pins and chains and added a machinegun. Also painted the optics. Touchups incoming when washes and filters are applied.