Early Tiger 1 my first build

Markocaster · Post by **Markocaster** » Mon Sep 29, 2014 6:29 am

No new progress. Working 2 jobs at the moment and it turns out I now have bloody
Shingles ! This getting older is for the birds! Off to the VA hospital tomorrow to get it sorted
And then hopefully I can work on the tiger some more.

ALPHA · Post by **ALPHA** » Mon Sep 29, 2014 3:48 pm

Markocaster wrote:No new progress. Working 2 jobs at the moment and it turns out I now have bloody
Shingles ! This getting older is for the birds! Off to the VA hospital tomorrow to get it sorted
And then hopefully I can work on the tiger some more.

SHINGLES???????????????????

...dang... you better get crackin on your tanks... too much stress buddy.... tanks are the best way to ease stress

Take care dude

ALPHA

Post by **HERMAN BIX** » Sat Dec 20, 2014 11:56 am

Hey mate, I see you are back.

Assuming you are ok for the record...................the Tiger ?...........hows the Tiger

Markocaster · Post by **Markocaster** » Tue Feb 17, 2015 10:48 pm

Built a shelf in the garage today to store the tanks.

Sure been slow going lately. But I will finish it

Post by **HERMAN BIX** » Wed Feb 18, 2015 10:35 am

Great to see you're around mate

You will get there, once life waits up a bit eh

Markocaster · Post by **Markocaster** » Mon Nov 16, 2015 4:44 am

It's been ages and ages since I last posted. Tonight I was messing around w the Clark TK 22
Board. I set it up as per the Clark web page and I get nothing. I think it may be a radio / receiver issue. It's got the proper specs but I haven't hooked anything like this up before. I am getting power the little fan spins but that's it. No movement at all? Any advice appreciated, I haven't a clue when it comes to r/c that's my weak link.
Some photos of my set up

At the moment I just want lower hull power and then will add servo recoil.

Markocaster · Post by **Markocaster** » Mon Nov 16, 2015 5:52 am

Kiaser wrote: where your on/off switch is the one beside it which is the smoker there should be a jumper on the two pin plug .

I think the jumper comes later with the turret / battle system, right now I just want it to move , period

thanks for the suggestion. You may be right I will keep poking around
Cheers
Mark

Markocaster · Post by **Markocaster** » Mon Nov 16, 2015 6:11 am

Kiaser wrote:Yes there should be a jumper plug in the 2 pin also to complete the circuit and If you need a pic I will pull mine out for you to have a look but there should be a jumper plug that sits in there that came with the board

And a jump plug which is used on the servo connector pins .

I have so much to learn

Markocaster · Post by **Markocaster** » Mon Nov 16, 2015 6:28 am

Kiaser wrote:See the little red jumper in the two pin smoker plug have a look at picture .

Think I've got it , will have a go and check in later. Thanks for the photos

Markocaster · Post by **Markocaster** » Mon Nov 16, 2015 7:18 am

Thanks Kaiser for the info. I am so bad at the r/c part of this hobby , I may be in over my head with this and have considered getting a taigen r/c set and using that. Plug and play I can do

Maybe it should just be a static model

I spent a bit more time on some details , assembling the tow cable attachments

Cheers
Mark

RC Tank Warfare community hobby forum

Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build

Re: Early Tiger 1 my first build