X-Mas came early this year

Feel free to discuss anything and everything to do with tanking here!
User avatar
Rob59
Warrant Officer 2nd Class
Posts: 1065
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: X-Mas came early this year

Post by Rob59 »

Image
User avatar
Rob59
Warrant Officer 2nd Class
Posts: 1065
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: X-Mas came early this year

Post by Rob59 »

My next project will my Panther Ausf.G
But I am still waiting for stuff to come in for that Panzer, so in the meanwhile I might make a driver and radio operator out of the two stock figures which do come with most tanks, to fit into my Ausf.F
I think I must cut them off just below the shoulders, and make some support inside the hatches in front of the turret, to put the both of them onto.
I am also expecting a couple of motorcycle goggles to put onto the driver and radio operator's faces.
As I am always messing up the figure's eyes, these goggles might skip that issue. Besides that, I think the goggles will look great on the guys peeking out of both hatches.
Must figure out some things first before I start cutting the guys.......
To be continued.
Last edited by Rob59 on Fri Aug 31, 2018 6:55 pm, edited 1 time in total.
User avatar
Rob59
Warrant Officer 2nd Class
Posts: 1065
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: X-Mas came early this year

Post by Rob59 »

As I look at the handles I just made......they look like German handgranates, hahahahahahaha!
But no matter what you guys say...they will stay on the hatch :D :D :D
User avatar
HERMAN BIX
Major-General
Posts: 11404
Joined: Sun Jan 12, 2014 12:15 am
Location: Gold Coast,Australia

Re: X-Mas came early this year

Post by HERMAN BIX »

I love what you have done on the hatch !
Sometimes it’s the little things in life that seem to make a bigger difference than they intend!
Great commander and the idea of goggles on your two crew is an innovative solution to both eye painting and dust in ya face if you were in s real vehicle on a dirt road in summer in Europe !
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
User avatar
Rob59
Warrant Officer 2nd Class
Posts: 1065
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: X-Mas came early this year

Post by Rob59 »

Thnkz for the compliments.
User avatar
Rob59
Warrant Officer 2nd Class
Posts: 1065
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: X-Mas came early this year

Post by Rob59 »

Btw, this figure is from Torro too just like the one in my Panther-G.
The legs need to be amputated to make 'm fit into the cupola.
User avatar
jarndice
Colonel
Posts: 8397
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Re: X-Mas came early this year

Post by jarndice »

Hi Rob, When I have to fit handles on to a flat surface I first of all pin vise a couple of holes for the handle to sit in.
Not too deep just enough for the handle to be properly located and for the Glue to have something to grip.
I think I am about to upset someone :haha:
User avatar
Rob59
Warrant Officer 2nd Class
Posts: 1065
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: X-Mas came early this year

Post by Rob59 »

Shaun, good afternoon.
I did not take the hatch off the tank so I was afraid damaging the hinge when making pinholes.
It did work the way I did too.
User avatar
Rob59
Warrant Officer 2nd Class
Posts: 1065
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: X-Mas came early this year

Post by Rob59 »

Made a start with both figures to fit the hatches on the hull

Sorry guys....
Imageimage hosting

Image
User avatar
Rob59
Warrant Officer 2nd Class
Posts: 1065
Joined: Wed Jul 04, 2018 6:14 pm
Location: Netherlands

Re: X-Mas came early this year

Post by Rob59 »

Post Reply

Return to “General Discussion”