Page 12 of 16
Re: hugill,bear, and the heat........
Posted: Sun Sep 14, 2014 5:35 pm
by brizo58
Hi,
Sorry canned but I have got to wait until I get my turret from mr Forgebear. Until then there's not a lot I can do. Just getting on with the top hull. I do now have all the parts to fit the turret to the hull now just missing the main part
. As soon as it's here I will put some more pics on.As I said I cut the posts off inside of the 105 hull that hold the turret motor and centre rollers I will fit them when I have the turret to make sure they are in the right place. I should have the top hull done tomorrow!! With any luck if so I will undercoat and a temp top coat of desert yellow. Until I mix the right colour.
That's about it at the moment. Regards, Brian...
Re: hugill,bear, and the heat........
Posted: Sun Sep 14, 2014 5:57 pm
by tomhugill
Canned, the reason I think mine use the mato turret ring is because it fits snugly with the upper hull, which the tamiya might not do on that cast hull. However your using the welded hull so shouldn't be an issue.
Re: hugill,bear, and the heat........
Posted: Sun Sep 14, 2014 7:35 pm
by ALPHA
Toss this baby across the Pacific Canned.... Some Grubby hands with take hold of it and finish it one way or another
ALPHA
Re: hugill,bear, and the heat........
Posted: Mon Sep 15, 2014 7:54 am
by cannedheat
its going to get finished old chap but over hear old chap sorry , I am being very disciplined on this, its my baby don't want to get it wrong, my impatience has cost me in the past so until my bits arrive ?
Re: hugill,bear, and the heat........
Posted: Mon Sep 15, 2014 8:39 am
by ALPHA
cannedheat wrote:its going to get finished old chap but over hear old chap sorry , I am being very disciplined on this, its my baby don't want to get it wrong, my impatience has cost me in the past so until my bits arrive ?
OUTSTANDING Sir.... it's a very good path you follow
ALPHA
Re: hugill,bear, and the heat........
Posted: Mon Sep 15, 2014 9:29 am
by cannedheat
tom /bri...wot wot .... so one can use the 105 turret ring on the m51 turret one has to remove the 45degree angled /bracket/piece with the 2 fix holes ...so then you just fit the 105 ring to the 2 small holes as per 105 .....
then the turret motor goes from right side [as pic] to the left ? but its a no good fix if you req the elivation......
Re: hugill,bear, and the heat........
Posted: Mon Sep 15, 2014 10:40 am
by tomhugill
Hey stu, definitely don't remove anything yet. The bit you describe is required for the elevation. Would it not be easier to use the super Sherman turret ring? Can order it for you if required.
Re: hugill,bear, and the heat........
Posted: Mon Sep 15, 2014 10:52 am
by cannedheat
tomhugill wrote:Hey stu, definitely don't remove anything yet. The bit you describe is required for the elevation. Would it not be easier to use the super Sherman turret ring? Can order it for you if required.
my mistake meant elevation not recoil silly boy me ....not doing any thing to the turret tom ,and not sure what dave has on order def the rollers and e sprue at great expense but if you don't mind getting us a turret ring then do so ...cheers [ can I pay you in instalments a shilling a week or a go pro ?]
Re: hugill,bear, and the heat........
Posted: Mon Sep 15, 2014 11:00 am
by tomhugill
Done some digging, m51 uses the same turret ring as the king tiger. I've got a big box of king tiger bits so might have a spare. Will check this evening.
Re: hugill,bear, and the heat........
Posted: Mon Sep 15, 2014 11:48 am
by cannedheat
tomhugill wrote:Done some digging, m51 uses the same turret ring as the king tiger. I've got a big box of king tiger bits so might have a spare. Will check this evening.
even better cheers wot wot ......