Page 11 of 12
Re: Hooben T-55A Build
Posted: Sat May 10, 2025 1:38 pm
by Martin2556
Pavel wrote: ↑Sat May 10, 2025 10:26 am
The sight must be covered with glass.
Thanks for the information & photos Pavel,
I wasn’t sure if when the tank was new, that the sight glass was always fitted or not.
I’ve seen photos of T-55’s some with the sight glass fitted & some without.
Re: Hooben T-55A Build
Posted: Sat May 10, 2025 2:30 pm
by Pavel
Those rare photos without glass are an anomaly!
The tank was made for war in contaminated areas and was practically sealed, even the front machine gun was removed from its socket and it was closed from the inside, there was ventilation inside the tank through anti-radiation filters.
Therefore, the glass being removed is a violation and someone will pay for it...
A sealing rubber was placed under the glass and it was screwed with wing nuts.
Re: Hooben T-55A Build
Posted: Sat May 10, 2025 4:43 pm
by ColemanCollector
No rest for the wicked, Martin. You now get to make 6 teeny-tiny wingnuts!
Mike.
Re: Hooben T-55A Build
Posted: Sat May 10, 2025 5:36 pm
by Pavel
The wing nuts were on sale.
But someone made them themselves...
Re: Hooben T-55A Build
Posted: Sat May 10, 2025 9:36 pm
by Martin2556
Pavel wrote: ↑Sat May 10, 2025 2:30 pm
Those rare photos without glass are an anomaly!
The tank was made for war in contaminated areas and was practically sealed, even the front machine gun was removed from its socket and it was closed from the inside, there was ventilation inside the tank through anti-radiation filters.
Therefore, the glass being removed is a violation and someone will pay for it...
A sealing rubber was placed under the glass and it was screwed with wing nuts.
Thanks for the clarification Pavel, very informative.
Re: Hooben T-55A Build
Posted: Sat May 10, 2025 9:40 pm
by Martin2556
Thanks Mike & Pavel, I do have some Schumo wing nuts that will do the job.
Re: Hooben T-55A Build
Posted: Sat May 10, 2025 10:06 pm
by Timbo68
As a full member of the Hooben T-55 survivors club I have to say that this is amazing. In my ignorance, I stuck the vent on the top of my turret, thus making it a T-54 - apparently!
Re: Hooben T-55A Build
Posted: Sun May 11, 2025 8:25 am
by Martin2556
Yes Timbo68,
T-54 or T-55
Apparently the turret ventilator on the T-54 was deleted on the T-55 as in wasn’t compatible with the NBC (nuclear, biological, and chemical) protection system.
So also making mine a T-54 as it has the turret ventilator fitted.
It’s only held on with double sided tape so easily removed & if removed it would then make it a T-55.
Apparently as I understand the only external difference between the T54 & T55 is the turret ventilator, but I could be wrong.
Re: Hooben T-55A Build
Posted: Sun May 11, 2025 10:18 am
by Pavel
The most characteristic feature of the T-54 is the ventilation "mushroom" on the turret in front of the loader's hatch, which the T-55 does not have.
https://dzen.ru/a/YDAslS3FeVY2noEn
Re: Hooben T-55A Build
Posted: Sun May 11, 2025 12:18 pm
by Martin2556
Pavel wrote: ↑Sun May 11, 2025 10:18 am
The most characteristic feature of the T-54 is the ventilation "mushroom" on the turret in front of the loader's hatch, which the T-55 does not have.
https://dzen.ru/a/YDAslS3FeVY2noEn
Thanks Pavel for your clarification