King Tiger (henschell)

[Jofaur86]

For info (for KT Tamiya, but must adapt?) But not currently available
https://www.axels-modellbau-shop.de/kat ... -1-16.html
Available here, specific to Torro, Taigen, etc.
https://www.rctank.de/Tigre-Royal-Mirroir-r-angles

[Jofaur86]

For info (for KT Tamiya, but must adapt?) But not currently available
https://www.axels-modellbau-shop.de/kat ... -1-16.html
Available here, specific to Torro, Taigen, etc.
https://www.rctank.de/Tigre-Royal-Mirroir-r-angles

[NAB]

Ive been using a CD, Dremel and milliput. Will post pics once I'm happy with it

Sent from my KB2003 using Tapatalk

[Jofaur86]

Sorry to have posted 2 times, my fingers too big ?? without doubts
OK, hadn't that thought about it? thanks for the tip

[NAB]

Ok I've finished 2 prototypes but one has cracked so not sure I will use it.



Sent from my KB2003 using Tapatalk

[NAB]

Also Im definitely not doing 7 smaller ones for the commanders hatch so need to think of a better option!
I might just leave them all for now and see what other options I have

Sent from my KB2003 using Tapatalk

[PainlessWolf]

Nab!
Here is something to consider:

https://mk-modellbau.de/main_bigware_34 ... -jagdtiger
or
https://www.shapeways.com/product/Q5DFV ... arketplace

following along,
Painless

[Herr Dr. Professor]

…lots of other goodies on that Shapeways page! Thanks for the URL.

[NAB]

The shapeways link doesn't specify if they fit all the hatches including commanders

Sent from my KB2003 using Tapatalk

[Jofaur86]

The shapeways link doesn't specify if they fit all the hatches including commanders

Sent from my KB2003 using Tapatalk

these are the periscopes for the turret, 7 on the tank commander and the eighth on the inclined side, in front of the hatch
on the other hand seems identical dimensions? so for that of the inclined side, it will have to be done? either fill around ... on the link of RC Tank.de you will notice, that it is bigger
1: Turret commander
2: Turret in front of the hatch
3: In front of hatches, radio and driver, above front glazed

E8482D4E-BFA3-411E-8CA7-A44633EC73D7.jpeg (18.07 KiB) Viewed 3060 times