Page 2 of 2

Re: Does HL tank work with 7.2v 5300mAH Ni-MH battery ?

Posted: Tue Feb 07, 2012 10:28 pm
by Tankbear
ruben2005 wrote:hi there i think you will have to buy the black& red leads that plug into the imax b6 if you dont have them already try hobbypower on e bay or brentford rc both good sellers chap
I used the banana plug to deans connector then deans to crocadile clips and clipped them onto the battery pins, then left it out of way so wouldn't get knocked.

Then when I started using LiPo in one tank a cut off the tamiya socket from the tank and soldered a deans connector to it so had a tamiya adaptor.

Re: Does HL tank work with 7.2v 5300mAH Ni-MH battery ?

Posted: Tue Feb 07, 2012 10:32 pm
by Tankbear
Spartan Mart wrote:As long as its the same voltage it will work
The mh milliamps per hour just lasts longer the higher the number.
Generally I would agree when buying batteries go for same voltage, but I used 8 cells batteries with the HL and all ok. Check out this topic. http://www.rctankwarfare.co.uk/forums/v ... 113&t=8326

Ian.