RC Tank Warfare community hobby forum

which re-coil mod are you doing on the M41? mines got a servo re-coil i built myself

both really, but the Tiger first as thats possibly the easiest one?

it sure is
are you aiming for the tiger asiatam re-coil or adding the tamiya one?

not too sure whats out there, have to look around and see whats compatible on ebay.

Just a quickey, are these ok for camo work or do you have any recommendations?
Cheers

do you mean the tamiya spray cans?

if so then they may be two large a spray fan you could mask the area not wanting to be sprayed really well or handpaint them on or invest in an airbrush?

hope that helps

Rob

sorry, forgot to add this link http://www.ebay.co.uk/itm/PRO-MINI-AIR- ... 3ca9f4c6e9" onclick="window.open(this.href);return false;

it would be ok for larger areas it's basically a Badger airbrush didnt notice what needle size it had but id suspect a large line one

this is the one i got http://www.ebay.co.uk/itm/AB-130-PRECIS ... 58916673d8" onclick="window.open(this.href);return false;

its a top feed dual action there are cheaper ones about i think i paid about £15

you might get away with the one you linked to

if you do get an airbrush, instead of propelant cans, which work out bloody expensive, use the spare wheel from a car. you can get an adapter to fit the valve and either pump it back up with a footpump or get a little tyre inflator comp. just until you get a bigger compressor.
jeff

Thats what i used (car tyre)to use ages ago for spraying lol.