Page 2 of 2
Re: HL Flash Unit
Posted: Fri Jun 17, 2011 12:46 pm
by Tankbear
Clear as mud
I thought the HT unit came with 5 pin connector plugged into the right one and the micro switch 2 pin plugged into the flying connector off the 5 pin plug.
Re: HL Flash Unit
Posted: Fri Jun 17, 2011 6:25 pm
by blimp
- Easy really , there are are different leads for different versions
- I've got a flash unit too , but can't play with it yet - no microswitch . Doh .
- Fun , innit .
Re: HL Flash Unit
Posted: Sun Jun 19, 2011 9:12 pm
by Tankbear
Ordered.
I let you know how I get on.
Re: HL Flash Unit
Posted: Sun Jun 19, 2011 9:50 pm
by blimp
- Mmm , I'm going to ask one of the Stug ( + Jagdpanther ? ) owners , i believe the flash/recoil + microswitch is one of the options they have .
Re: HL Flash Unit
Posted: Sat Jul 02, 2011 12:29 pm
by Tankbear
Update.
Bit longer than expected due to first shop not having stock so had to reorder elsewhere else.
Result, plugged in and worked. (As I mentioned my airsoft already had the micro switch). Just need to figure a way to put it all together.
Re: HL Flash Unit
Posted: Sun Jul 03, 2011 3:02 am
by blimp
Sweet , Great stuff ! . - I don't have the micro switch .
Bum .
Re: HL Flash Unit
Posted: Sun Jul 03, 2011 10:38 am
by Tankbear
I found this mod
http://www.rccommand.com/guides/RX18FireMod.php" onclick="window.open(this.href);return false;
For the infra red version, airsoft still need a micro switch.
Re: HL Flash Unit
Posted: Sun Jul 03, 2011 5:08 pm
by Tankbear
Managed to install the flash unit.
Found when I disconnected the airsoft from the cannon, there is a metal tube up the cannon. Removed this and that left a gap so could feed flash and wires. Bit of tape over the BB loader channel all put back together.
I try taking video later, and uploading.