RC Tank Warfare community hobby forum

The H/long leccies are way better as you now than the wsn leccies and yes the boxes will be ok with them

the std wsn recoil unit isnt that bad and will run with a little wire tweaking from the boards

Hi thanks just Im compleatly useless with the electronic side ? Thats the only reason I was going to try and fit the HL recoil unit . But will think on that one . Im still intrested in the metal gears is that just a streight swap over or is there more involved , sorry new to WSN .

again thanks Andy

Yes they are a straight swap out and nothing else needed

same here on the electrics mate sometimes i get the horrible smell of burning

Sounds great what do you want for them please .

Thanks Andy

nothing mate i dont need them anymore they served a purpose so if you can use them ill send them when you need them

I'd steer clear of the metal gears (sorry rob, but I can't let you off-load your crap if it will cause grief to somebody else! ) My T34's (x3 operational battle tanks with 2 more in the workshop) run fine with the plastic gears, if you want 'better' then put some asiatam gearboxes in (major surgery warning!)- those aftermarket metal gears will wear out the mounts far faster than the stock ones...

Take out the battery box with Doctor Dremel , tape it shut, swap out the electronics for HL - I prefer the RX-14P over the -18 personally - and fit a DBC. The chassis is light enough not to need the metal gears, the drive doesn't get tangled in grass like the Pershing or Bulldog, and the tracks are broad enough to keep the long stuff at bay anyway.

HTH
Mart

Hi all , theres a lot to contimplate on this , I will think on it swapping HL electronics was something I did plan on . But im not starting this just yet .

Thanks all Andy