RC Tank Warfare community hobby forum

Herr Dr. Professor wrote: ↑Sun Oct 01, 2023 11:04 pm Obwohl es stammt aus dem Zweiten Weltkrieg, die SdKFz231 scheint mir als Raumschiff! So ein interresantes Modell haben Sie hier entwickelt.
Although it is an AFV from the Second World War, the SdKFz231 appears to me to be like a space ship. You developed such an interesting model here.

Thank you, sir. The next big step on to the sdkfz231 is a big Antenna made if brassrod. I think 2 or 3 mm thick.

Here is a very early design. A friend of mine searched for a long time a model of an t26
I believe it was the second model from me thats was completly designed in 3d and the printed.
Meanwhile i can say, i own 5 different versions on the vickers/t26 chassis
T26 old turret
T26 mg double turret
Fake t26 with kremlin gun
7tp with double mg turret
7tp
Vickers 6ton conversion with different turrethatches.
Unfortunatly i cant find some pics under 3mb. I had to resize them first

Also you can see a trailer for the russian zis cannon.

Hmm... a mobile Naval Gun! or is it a mobile Navel Gun?

Nice. For such a small tank the T-26 has a lot of detail. It was the first tank I attempted to 3D print. I wanted a small tank to cut my teeth on.

Herr Dr. Professor wrote: ↑Mon Oct 02, 2023 8:36 pm Hmm... a mobile Naval Gun! or is it a mobile Navel Gun?

Its a matter of your point of view.
https://tanks-encyclopedia.com/ww2/sovi ... ril-fools/

tankme wrote: ↑Mon Oct 02, 2023 8:50 pm Nice. For such a small tank the T-26 has a lot of detail. It was the first tank I attempted to 3D print. I wanted a small tank to cut my teeth on.

Thanks.
The real detailwork is scratch build. I used 2mm poly rod for the rivets and other small stuff.
Do you finished your Print?

The next one. This is m latest design.
I developed the last 9 months my design of the sdkfz250.
Driven by two gearmotors 16ga 300rpm and a chinese double esc.

Winterhammermodels wrote: ↑Mon Oct 02, 2023 10:09 pm

tankme wrote: ↑Mon Oct 02, 2023 8:50 pm Nice. For such a small tank the T-26 has a lot of detail. It was the first tank I attempted to 3D print. I wanted a small tank to cut my teeth on.

Thanks.
The real detailwork is scratch build. I used 2mm poly rod for the rivets and other small stuff.
Do you finished your Print?

I think I have 98% of it printed. Now that my printer is more dialed in I think I can tackle printing the last bits I'm missing.

tankme wrote: ↑Tue Oct 03, 2023 12:36 am

Winterhammermodels wrote: ↑Mon Oct 02, 2023 10:09 pm

tankme wrote: ↑Mon Oct 02, 2023 8:50 pm Nice. For such a small tank the T-26 has a lot of detail. It was the first tank I attempted to 3D print. I wanted a small tank to cut my teeth on.

Thanks.
The real detailwork is scratch build. I used 2mm poly rod for the rivets and other small stuff.
Do you finished your Print?

I think I have 98% of it printed. Now that my printer is more dialed in I think I can tackle printing the last bits I'm missing.

Sounds good. Hope to see some pics later. If you have some feed back you can text me.

Anyways here are my next projects:
I modeled a lorraine tractor. A long and a Short version.
Based on them i created a marder 1 and a leichte feldhaubitze 18.
All prototypes are sold over the time to some modelling colleages.

you have great looking models!