RC Tank Warfare community hobby forum

Posted: **Sat Aug 12, 2023 7:33 pm**

tankme wrote: ↑Thu Aug 10, 2023 7:30 pm Looks nice. I know you said you weren't going to sell this one on Cults, is it just for personal use then or are you going to be printing kits for sale?

I will sell 3D printing kits or assembled finished products.

Posted: **Sat Aug 12, 2023 7:36 pm**

jarndice wrote: ↑Thu Aug 10, 2023 7:03 pm Nice work, It makes me smile when I think of a company as big as Heng Long who cannot get the location of the Turret on the Tiger1 correct but one of the forums members thinks nothing of getting it exactly right for an IS-3.
More strength to your modelling skills sir,
I shall watch your progress with great interest.

Thank you, I will keep updating

Posted: **Sat Aug 12, 2023 7:43 pm**

Herr Dr. Professor wrote: ↑Thu Aug 03, 2023 8:53 pm "I make a living by making vehicle models." Well, your work may be the dream job for some of the wizards here on RCTW. I am impressed by what you are doing with the IS-3 here!

I used to work in a toy factory that produces RC cars,The workers there are very poor, working 80 hours a week, but their monthly salary is only 4500 RMB, equivalent to 600 euros。

Posted: **Mon Aug 14, 2023 3:52 am**

Geepers: at the current exchange rate of 1 to 14 cents US, a salary of ¥4500 per month is $621.26 US. As a retired professor from a state university, I get about 4 1/2 times that much between US Social Security and my pension.

Posted: **Mon Aug 14, 2023 8:25 am**

I just looked through all the STL files I downloaded from Cults and the sprocket ring that has the teeth on it that interface with the tracks is missing. I even downloaded a fresh copy of the files from Cults. This is all I have for files for the sprockets:

: Screenshot 2023-08-14 023555.jpg (35.53 KiB) Viewed 1846 times

Posted: **Mon Aug 14, 2023 7:02 pm**

tankme wrote: ↑Mon Aug 14, 2023 8:25 am I just looked through all the STL files I downloaded from Cults and the sprocket ring that has the teeth on it that interface with the tracks is missing. I even downloaded a fresh copy of the files from Cults. This is all I have for files for the sprockets:

Screenshot 2023-08-14 023555.jpg

: NY%Q8SQTNQ7}414_]4F6XPM.png (43.72 KiB) Viewed 1828 times

: }P7AYKBGB75MG~GEM7F$GAW.png (30.83 KiB) Viewed 1828 times

Posted: **Mon Aug 14, 2023 9:06 pm**

Thanks. I redownloaded the files and it's there now.

Posted: **Mon Aug 21, 2023 11:26 am**

: IMG_20230821_151754.jpg (1.88 MiB) Viewed 1755 times

: IMG_20230821_151847.jpg (2.32 MiB) Viewed 1755 times

: IMG_20230821_151855.jpg (2.47 MiB) Viewed 1755 times

: IMG_20230821_151906.jpg (2.18 MiB) Viewed 1755 times

: IMG_20230821_151914.jpg (2.17 MiB) Viewed 1755 times

: IMG_20230821_151919.jpg (2.57 MiB) Viewed 1755 times

: IMG_20230821_152636.jpg (2.41 MiB) Viewed 1755 times

: IMG_20230821_152646.jpg (2.57 MiB) Viewed 1755 times

: IMG_20230821_152928.jpg (2.15 MiB) Viewed 1755 times

Use a chamfer drill bit to chamfer several of the holes and use a file to shape the weld seam. Install the main gearbox and it looks good.

Posted: **Thu Sep 14, 2023 2:22 pm**

: IMG_20230904_011330.jpg (2.54 MiB) Viewed 1619 times

: IMG_20230831_222441.jpg (2.06 MiB) Viewed 1619 times

: IMG_20230831_210439.jpg (2.67 MiB) Viewed 1619 times

: IMG_20230831_210412.jpg (2.57 MiB) Viewed 1619 times

: IMG_20230831_205951.jpg (2.7 MiB) Viewed 1619 times

: IMG_20230831_205939.jpg (2.74 MiB) Viewed 1619 times

: IMG_20230831_205813.jpg (2.44 MiB) Viewed 1619 times

I have completed the painting work, but I have always forgotten to update the forum,

The handrails and antennas on the turret are made of brass.

3D printed gun barrel embedded with steel pipes

Posted: **Thu Sep 14, 2023 4:08 pm**

Is that SLS print? Looks so crisp!

RC Tank Warfare community hobby forum

1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3

Re: 1/16 IS-3