Page 2 of 5
Re: my Heng Long jagdpanther
Posted: Mon Aug 31, 2009 9:28 pm
by raven
hi your welds look good to me will be watching your build
chris
Re: my Heng Long jagdpanther
Posted: Mon Aug 31, 2009 11:00 pm
by xrad
Re: my Heng Long jagdpanther
Posted: Tue Sep 01, 2009 1:54 am
by jumags
ty ty
should seen that link before i made the weld seams.....lmau cant remove the milliput already hahaha
Re: my Heng Long jagdpanther
Posted: Tue Sep 01, 2009 5:21 pm
by xrad
I does not matter, your seams are still very good and way above stock! just have to plan for the next tank.....
Re: my Heng Long jagdpanther
Posted: Tue Sep 01, 2009 5:49 pm
by jumags
well while waiting for the parts to arrive ive started reviving ming dead tiger..covering the extra large 9mm hole for the tensioner(asiatam)w/ milliput)gonna fit tant model-bau tensioner insted..ived also started puting zimerrit with CAUTION these time hehehe...thx man..im just a beginner sorry
zimerit on tiger
Posted: Tue Sep 01, 2009 11:45 pm
by jumags
ille do it part by part
what can you say guys
Re: my Heng Long jagdpanther
Posted: Wed Sep 02, 2009 3:20 am
by Saxondog
Why are you changing the tensioner? I have an ASIATAM HULL and the tensioner is to high so have you decided to change for that reason?Sax
Re: my Heng Long jagdpanther
Posted: Wed Sep 02, 2009 1:40 pm
by raven
hi for your track hangers you need 5mm wide x 1mm brass strip thats for the back plate and 2.5mm or 3mm wide x 1mm brass strip for the hangers also you need 1mm drill bit let me know when you get them and ill post up the mesurements
chris
Re: my Heng Long jagdpanther
Posted: Wed Sep 02, 2009 7:30 pm
by jumags
thanx raven...
sax
im fed up with the asitam hull im gonna use the stock tiger lower hull...got no chance for the asitam already
zeik
Re: my Heng Long jagdpanther
Posted: Wed Sep 02, 2009 10:51 pm
by xrad
damn, JUMAGS!
That is some fine improvement on your Zimm compared to your earlier welds!
