my Heng Long jagdpanther

[raven]

hi your welds look good to me will be watching your build

  chris

[xrad]

for future welders:

http://www.armorama.com/modules.php?op=modload&name=Sections&file=index&req=printpage&artid=220

[jumags]

ty ty
should seen that link before i made the weld seams.....lmau cant remove the milliput already hahaha

[xrad]

I does not matter, your seams are still very good and way above stock!  just have to plan for the next tank.....

[jumags]

well while waiting for the parts to arrive ive started reviving ming dead tiger..covering the extra large 9mm hole for the tensioner(asiatam)w/ milliput)gonna fit tant model-bau tensioner insted..ived also started puting zimerrit with CAUTION these time hehehe...thx man..im just a beginner sorry

[jumags]

ille do it part by part

what can you say guys

[Saxondog]

Why are you changing the tensioner? I have an ASIATAM HULL and the tensioner is to high so have you decided to change for that reason?Sax

[raven]

hi for your track hangers you need 5mm wide x 1mm brass strip thats for the back plate and 2.5mm or 3mm wide x 1mm brass strip for the hangers also you need 1mm drill bit let me know when you get them and ill post up the mesurements

    chris

[jumags]

thanx raven...
sax
im fed up with the asitam hull im gonna use the stock tiger lower hull...got no chance for the asitam already
zeik

[xrad]

damn, JUMAGS!
That is some fine improvement on your Zimm compared to your earlier welds!