Page 2 of 2

Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Wed Jan 26, 2022 10:54 am
by FredtheFrench
Really nice conversion!!! :thumbup:

Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Wed Jan 26, 2022 11:23 am
by shatanka
Kaczor wrote: In your conversion only steering wheel is used for turning?
Yes. I will put a small O ring in the center of the front wheel for better traction.
Tiger6 wrote::thumbup: what did you use for motors and controller?
I wanted to keep the cost really low. I had Tamiya 70188 Mini Motor Gearbox (8-Speed) Kit https://www.pololu.com/product/1682 https://www.pololu.com/product/1682 at home. It is not ideal, but it does the job.

A cheap china made ESC.
Brushed 20A ESC,Brushed ESC Electronic Speed Controller with Brake for RC Car/Boat

FredtheFrench wrote:Really nice conversion!!! :thumbup:
Thanks.
Tiger6 wrote:Has anyone else found excessive amounts of flash on the back of their road wheels?
Yes the quality is below expectations.
Tiger6 wrote: I think later in the year we should all have a guess at how far this is going go before it disintegrates spectacularly...
I have already broke three one. Drilling small holes than used 0,5mm steel wire. Soma CA and now it works.

There is a hungarian guy who makes high quality tracks for metal. https://www.facebook.com/Attracks/

If you are interested we can design metal tracks for this kit. I want to buy one set, but if we order togather the prices will drop :)

Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Wed Jan 26, 2022 1:06 pm
by Model Builder 4
I could be interested in getting a set of metal tracks for one as well, depending on cost :thumbup:

Cheers, Lee.

Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Wed Jan 26, 2022 1:08 pm
by Kaczor
Interesting. I see this guy makes also track for PzKpfw 38(t) and other models. Tracks for 1/16 Stuart would be great too ;)

Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Mon Jan 31, 2022 7:46 am
by Kaczor
I wonder if 1:35 metal tracks dor Sdkfz 250 or 251 would fit.

Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Thu Feb 17, 2022 1:23 pm
by Will01Capri
Kaczor wrote:I wonder if 1:35 metal tracks dor Sdkfz 250 or 251 would fit.
Thats a good idea, i will measure them up and scale down against the kettenkrad parts i have

Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Sun Nov 27, 2022 5:28 pm
by Winterhammermodels
Hello,
I have a freedom kit kettenkrad on the bench from a friend of mine.
Could someone show me some pics of the gearbox?

Best regards fron germany

Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Thu Dec 08, 2022 5:20 am
by shatanka
Winterhammermodels wrote:Hello,
I have a freedom kit kettenkrad on the bench from a friend of mine.
Could someone show me some pics of the gearbox?

Best regards fron germany
Hi friend!

I hope it helps :)
You can find the gearbox on ebay or at pololu. https://www.pololu.com/product/1682[IMG ... e5d4c8.jpg[/IMG]Image

Tapatalkkal küldve az én SM-G780G eszközömről


Re: Freedom Model 1/16 Sd.kfz.2 Kettenkraftrad

Posted: Thu Jan 12, 2023 6:01 am
by Kaczor
New conversion kit from 35rctank.com
http://www.35rctank.com/html/k21.html
db_GearboxASM__1_1.jpg
db_GearboxASM__1_1.jpg (13.36 KiB) Viewed 1922 times
phpBB [video]