Re: KV-13(OBJEKT 233 )
Posted: Sat Aug 20, 2022 1:32 pm
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
KV-13(OBJEKT 233 )
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=32403
Page 2 of 3
Re: KV-13(OBJEKT 233 )
Posted: Sat Aug 20, 2022 11:12 pm
Very nice tanks
Re: KV-13(OBJEKT 233 )
Posted: Fri Jun 23, 2023 1:19 pm
https://youtu.be/XggxbzoRNk8
I changed the recoil and lifting to the installation without servo
I changed the recoil and lifting to the installation without servo
Re: KV-13(OBJEKT 233 )
Posted: Fri Jun 23, 2023 9:20 pm
Your change makes for a compact operating recoil barrel, fitting in the turret well. And the recoil is convincingly fast, looking realistic.
Re: KV-13(OBJEKT 233 )
Posted: Mon Jun 26, 2023 7:03 am
The main idea is not to use servo. this allows the henglong 6.0/7.0 boards to work
Re: KV-13(OBJEKT 233 )
Posted: Mon Jun 26, 2023 10:10 am
Brilliant Sir
Re: KV-13(OBJEKT 233 )
Posted: Mon Jun 26, 2023 7:43 pm
Artem RedArmy wrote: ↑Fri Jun 23, 2023 1:19 pm https://youtu.be/XggxbzoRNk8
I changed the recoil and lifting to the installation without servo
I am impressed by your work with the recoil. Can you explain how you did it? I am a beginner with electronics but I like the way your barrel recoils. I had considered upgrading to 7.1 for the servo recoil function but I am looking for a cheaper alternative using what I have on hand already.Artem RedArmy wrote: ↑Mon Jun 26, 2023 7:03 am The main idea is not to use servo. this allows the henglong 6.0/7.0 boards to work
Thank you in advance great work.
Chef
Re: KV-13(OBJEKT 233 )
Posted: Tue Jun 27, 2023 11:54 am
Re: KV-13(OBJEKT 233 )
Posted: Tue Jun 27, 2023 10:04 pm
Looking awesome mate !
Is that a solenoid for the recoil ?
What about the lifting unit ? You said no servo but it does look like a servo, however speed is very low (and it looks great), I used a modified servo to be used with a TK 7.0 on my Churchill for the lifting but it's super fast, way too fast to be realist, I have to be super easy on the stick to look accurate.
Is that a solenoid for the recoil ?
What about the lifting unit ? You said no servo but it does look like a servo, however speed is very low (and it looks great), I used a modified servo to be used with a TK 7.0 on my Churchill for the lifting but it's super fast, way too fast to be realist, I have to be super easy on the stick to look accurate.
Re: KV-13(OBJEKT 233 )
Posted: Wed Jun 28, 2023 9:46 pm
I used this gearbox. Смотри, что есть на AliExpress! N20 металлическая коробка передач, редукторный двигатель DC3V 6В 12В 4rpm-380rpm медленная скорость Электродвигатель с высоким крутящим моментом DIY робот автомобиль элтрический замок за 347,10 ₽ - уже со скидкой -7%
https://sl.aliexpress.ru/p?key=BsSPZED
https://sl.aliexpress.ru/p?key=BsSPZED