RC Tank Warfare community hobby forum

Hello, what kind of printer are you using?

Hi.
using heavily modified Anycubic Chiron for this.
But any printer with at least 350x350x350mm buildplate can be enough for this.
Lot of people are recommending Creality CR10, but i am with Chiron.
Its a workhorse.

I used a Creality CR10 S4 with no issues


Sent from my iPhone using Tapatalk

Big Brother has arrived.

Thank you for the answer

Have tested a new gun.
Equipped with MG995 servos.
There are bearings in the servo arms for the smooth movement of the big parts (optional).
Tested with random 3D printer control board (trigorilla) and my own single-use arduino sketch.

That is a wild bit of gear mate !
Fantastic development work.
I'd love to be the first to get one of your Hetzers down here.

It certainly puts things in perspective


Sent from my iPhone using Tapatalk

Thank you very much, guys.
I will be happy to provide 1/6 Hetzer for you, Herman (and every other member of the forum).
STL files + assembly/printing guide is ready for 99%.
Just need to print this testing piece.
And because i dont have space for this 1/6 vehicle in my house, this first 1/6 Hetzer will be sold after testing .

scrolling by and stopped because it said the stl files are included. Was like maybe I can print one and try to make one. I don't see any files tho. if it's ready to be downloaded or purchased please let me know. Thank you for your time.