RC Tank Warfare community hobby forum

leopardgreece wrote:Vape Liquid oil has a lot of glycerin. It's ok but maybe it will destroy the coil and the heater element soon.

????? ?? SM-N950F ???????????? Tapatalk

Maybe the entire system could be replaced for a $10 vaping machine, it's got its own battery and won't run out the tank's Battery, and problem solved.
I thought on it first, but since Vappers are dying From cancer more often than smokers are, it won't be polite, or child safe to use it indoors.

Can u send a photo of this system of vaping machine? I m interested in.......!!!

????? ?? SM-N950F ???????????? Tapatalk

Jimster wrote:I use Mega Steam. It works very well and I keep a spare bottle on hand. Right now I’m using their hot chocolate scented oil. Not bad. Maybe next order will be bacon. Mmmm!

Can you get egg flavour to mix in with it, and wholemeal toast too?

I think I could whip up a bit of my home brewed egg scent.

So what is your favorite scent?

leopardgreece wrote:Can u send a photo of this system of vaping machine? I m interested in.......!!!

????? ?? SM-N950F ???????????? Tapatalk

Hi, I Don't have it.
Is just an idea: bypassing the switch directly to a servo or a relay to the device and insert some copper and fish tank tubing to the mouth piece... let me see if I can find something and I'll post a mini tutorial here!

Well, I conducted a few preliminary tests (put the thing inside a very old tamiya leopard 1 and turned on actually) and there is plenty of "smoke" (mist, actually, that came out of tap water) this nullify the fumes, that at some point might be toxic, and also will sanitize your spaces since the capsule I'm going to work with, was meant for it. this is the video of the idea. There is many 3D print to do and many adjustments to make, but it just came up to me a couple of hours ago!
https://www.youtube.com/watch?v=vh7Etd4 ... sSalencPBP

Which G.I. smoker has 2 pair of wires ? I want one for Mato Tiger 1 with Clark TK80 board.

????? ?? SM-N950F ???????????? Tapatalk

Thank you very much my friend

????? ?? SM-N950F ???????????? Tapatalk

Luivraos wrote:Well, I conducted a few preliminary tests (put the thing inside a very old tamiya leopard 1 and turned on actually) and there is plenty of "smoke" (mist, actually, that came out of tap water) this nullify the fumes, that at some point might be toxic, and also will sanitize your spaces since the capsule I'm going to work with, was meant for it. this is the video of the idea. There is many 3D print to do and many adjustments to make, but it just came up to me a couple of hours ago!
https://www.youtube.com/watch?v=vh7Etd4 ... sSalencPBP

I'm behind schedule on this one. Lots of other 3D printing work but I still think about Totally Replacing the System with a more "indoor friendly" fume maker which might use basic tap water and scented with any food grade scent

First problem I faced is the Leaking, since the system works on steam and leaks some drops of water. but they might be used to cool down the motors and then dispached again to the water tank... ooh, I love Over thinking things!!