RC Tank Warfare community hobby forum

Airbrushing needs lots of very light passes , if you press too hard paint will creep under the stencil.

ronnie42 wrote:Airbrushing needs lots of very light passes , if you press too hard paint will creep under the stencil.

Not on mine.

Unless you do it on purpose, full pressure, full paint, the tip next to the stencil and so on, of course.

I have enlisted the help of Rad now. My Challenger is a superb kit so it really deserves to not be embarassed by poor decals!

Check out Late kt in the Tamiya builds , just done the turret markings. Almost got the correct colours , after a few goes at mixing for the right shade.