RC Tank Warfare community hobby forum

Thanks for the suggestions guys. Will try them all, one has gotta' work. Andrew

Andrew mate, don't keep us in suspense. How are you getting on with the idlers and all the rest of your upgrades ?

Nick,

Nick, ...........Nick shame on you, you know we spend 25 hours a day 8 days a week at work, aint had any time to even think about it this week. let you know asap.Andy

To remove standard idlers,insert small cross head screwdriver down hole in idler.the screw is a coarse thread screwed directly into hull.
To fit idlers you will need to drill original hole out 4mm gives a nice tight fit.

He's right you know!

Rob G

Yes he is most certainly right, came off like a dream. Many thanks guys much appreciated. cannot for the life of me think why I never thought of trying that before. Getting old I guess. However, How do you remove the wheels from the suspension, I need to replace the springs as they are far too soft.

And can the suspension arms be made to have a little less side play.

Any suggestions most welcome. Andrew

The hub caps on the road wheels definatly come off. Again there is a cross head underneath.

Dave

Cheers Dave, will give a try. Andrew

Yes i was right

Re removing road wheels.
Looking at the hull left hand side looking from front remove wheels and suspension arms as a unit front to back,replace spring and re-assemble back of hull to front.
Right  hand side is done from back of hull to front.