Taigen late panther G

[c.rainford73]

Lovely work. I'm a big fan of your mr Surfacer finish.

[Soeren]

This is the Heng Long upper on the Taigen lower, right?

[tomhugill]

This is the Heng Long upper on the Taigen lower, right?

It's the old taigen upper before it was retooled so pretty much same.as Henglong

[tomhugill]

Hey guys, today was a good day, my tank modellbau order and some other bits have arrived. Annoyingly I forgot to order the exhaust supports.

So a fair bits been done, fineline Aber mg added, new more accurate headlamp (found a Bosch piece of photo etch to improve it), turret detail bits added, I've rescribed the flame torch marks with a milling bit and a dremmel, lots done on the vents, new grills added and tank modellbau frames, lifting hooks added to the rear deck, resin replacement antenna base, mk modellbau 3m antenna, convoy bracket and green convoy lamp. I'm planning on adding some more detail to the headlamp and scratch building the exhaust supports. Next up is the side skirts

Sent from my SM-G950F using Tapatalk

[Soeren]

All the nice little detail adds up .
Don't forget about switching the engine deck lifting hooks. That would be a shame in the end. Do you know of optics that fit this hull? The newer tooling has them included, although very basic ones at least.

[Marco Peter]

Love the BOSCH letters on the headlight now!

Can you still turn the machine gun? It should be rotated 90 degrees clockwise from how it is right now.

Like this:

[c.rainford73]

Tom your "first draft" is better than many others third attempt

[tomhugill]

Had a spare half hour, decided to fit the skirts from tank modellbau, unfortunately i found they were the wrong size, not tall enough compared to the impact ones so I fitted the impact ones I had left, they seem to work well with the brass plates. I'm afew short of a full set but thats some often seen in period photos.

Sent from my SM-G950F using Tapatalk

[c.rainford73]

You are a true craftsman following along

[tomhugill]

Love the BOSCH letters on the headlight now!

Can you still turn the machine gun? It should be rotated 90 degrees clockwise from how it is right now.

Like this:

Thank you! Yeah the mg isn't fixed in yet