Profiline Jagdpanzer IV conversion

[Ad Lav]

Don't have to cut and shut a tamiya?

Be interesting to see what board you put in her

[c.rainford73]

Bill looks very nice. Are you changing the front drive sprockets? Following along

[lmcq11]

Hi, this is a very good start.
I've done this same conversion. It can be made into a great model for a fraction of the cost of a Tamiya model. Keep in mind that with such conversions, there are more that one way of doing things and experimenting the various options is part of the fun. And there is always one more thing that can be done... Knowing when to stop, what is acceptable and how much effort to put into an area to get it perfect is a personal decision. The idea is to avoid regrets later, when it is too late. It happens that I redo something twice or more because I am not happy with the results, trashing the whole previous day work, as frustrating as it can be. It's part of the game. Conversions take a different mind set than building a true kit. After a couple of these, you will find out that building a regular kit lacks challenges.
Regards, Louis

[capt midnight]

Looks brilliant Bill, I’m working on one of these atm too, just wish mine was as far along as yours.
Where did you get the steel wheels from?
Cheers
Wayne


Sent from my iPhone using Tapatalk

I picked the steel wheels up from Asiatam. We were placing an order anyway, so it saved on postage. I think they were about $8US a pair.

Now that right there is great work Captain.
I hazard a guess to a third of the cost of a Tamiya, and a lot less stress when it comes to cutting & shutting it

The lead roadwheels are nice, how were they to fit ?

I'm really working on a budget of just about zero on this project, so it'll be a cheap build. Not too many bells and whistles, but a lot of scratch building and re purposing.

As to the wheels, Herman, All the fitting involved was removing the plastic HL wheels and installing the steel ones. No trimming or fitting at all. I was really quite pleased with them looks wise and they are actually pretty heavy.

Bill looks very nice. Are you changing the front drive sprockets? Following along

To be honest, Carl, I never really noticed that the sprocket was different until you mentioned it. I guess I'll have to dig and see if I've got a set, or hunt them up.

Thanks to all for the great comments. It's really been a nice build so far, and that's just the boring stuff!

Bill

[Will01Capri]

Thats a nice looking conversion kit. Been looking at these for one of the next projects as I have a Panzer IV chassis with metal suspension that is crying out for conversion.
Like the work and it is going to be a great tank

[HERMAN BIX]

I think I have a sprocket set mate, no use to me as I will not be doing another Pz 4 until the next ice age
At work now but will confirm later and advise
If they are late ones you can have them.

Please hold for further info !

[brizo58]

Hi All,
Here’s my Profileline Jagdpanzer IV...

[capt midnight]

Nice Jagd! I hope mine comes out half as good. As I was looking at your Jagd, I was thinking that the rear side plates on mine are a tad short top to bottom. I'll have to do some measuring and maybe just make some new ones out of sheet plastic.

Here's the camo I think I'm gonna use...

jagdpanzerivl70bm_4.jpg (75.29 KiB) Viewed 4054 times

I like the hard edge of the dots with the soft edge of the sand. Should be pretty easy to paint.

I think I have a sprocket set mate, no use to me as I will not be doing another Pz 4 until the next ice age
At work now but will confirm later and advise
If they are late ones you can have them.

Please hold for further info !

Thanks, Herman! Really appreciate you taking a look for me.

Does anyone know if the return roller supports on a PZIII are the same as a Jagd? I found some metal ones on evilbay, but I'm not sure if they'll work. Any suggestions?

Thanks, Guys!

Bill

[B_Man]

The return rollers you need are the late style steel rollers with no rubber. I think AsiaTam might do them.

[HERMAN BIX]

Yip, got a set of sprockets Captain.

I also have a full metal hatch set for one of those Pz IV damnation's
Im certain you can use them on your JPzIV

Both lots yours if you want them..................you've done well and truly right by me, so this is my chance to get a bit of a return to you Sir.
Say the word mate