Page 2 of 4
Re: 10k volume control
Posted: Mon Oct 23, 2017 10:13 pm
by c.rainford73
Have you tried Mr Maxmekker's trick John?
Re: 10k volume control
Posted: Mon Oct 23, 2017 10:15 pm
by maxmekker
Yes sir .
have bought 20 of them to have alongside tk boards I sell , works well with me ( after moving the red wire )
- 22687929_10154711046801582_3674186348165072617_n.jpg (45.04 KiB) Viewed 4640 times
Re: 10k volume control
Posted: Mon Oct 23, 2017 10:35 pm
by maxmekker
Re: 10k volume control
Posted: Mon Oct 23, 2017 10:36 pm
by c.rainford73
Very cool. Much nicer than the standard Heng Long/Taigen setup. Thanks Max
Re: 10k volume control
Posted: Tue Oct 24, 2017 7:06 am
by Ludwig von wigbearer
That's great, will give that a try out today.
Thank you
regards john
Re: 10k volume control
Posted: Tue Oct 24, 2017 7:29 am
by Ludwig von wigbearer
Hi, IT WORKS, just tried it out, sounds fantastic, although the wife wasn't too happy being woken by a growling
Sherman early am
, will change the other pots over as well
Thanks again
regards john
Re: 10k volume control
Posted: Tue Oct 24, 2017 11:23 am
by c.rainford73
Most excellent news John ( not the upset wife and growling part of course)!!!
Re: 10k volume control
Posted: Tue Oct 24, 2017 11:31 am
by Ludwig von wigbearer
Hi carl, I didn't realise something as simple as that would give such a result, before I changed over the wire they
were wired exactly as the original pot, very happy with them now though, they cost £4.97 inc delivery for 5 from a
oriental ebay seller.
regards john
Re: 10k volume control
Posted: Tue Oct 24, 2017 11:46 am
by c.rainford73
Ludwig von wigbearer wrote:Hi carl, I didn't realise something as simple as that would give such a result, before I changed over the wire they
were wired exactly as the original pot, very happy with them now though, they cost £4.97 inc delivery for 5 from a
oriental ebay seller.
regards john
That's why I'm glad you had the wizard give you some advice
Re: 10k volume control
Posted: Tue Oct 24, 2017 3:37 pm
by PainlessWolf
Good morning,
I've been fortunate since my sound pots come from Max and (unknown to me til now ) work so well because he had already moved the wires around. I think this post just solved my Smoker issue as well. Brand new Smoker will not work plugged into the TK24. Switch is new too. I will bet the issue is the wire location in the plugs since Clark is very specific about where the hot and ground go into the board plug ins.
regards,
Painless