Page 2 of 2
Re: IBU 2 recoil/gun flash issue
Posted: Fri Aug 11, 2017 6:53 pm
by Ferny
Yes I believe it can be done
Sent from my SM-G930F using Tapatalk
Re: IBU 2 recoil/gun flash issue
Posted: Sun Aug 13, 2017 8:48 am
by Tankbear
h5djr wrote:Tankbear wrote:Which recoil you using?
I have not bought one yet. I just want to make sure that what ever I do buy it can be set so that there is no body or track movement when the main gun is fired, just like a real Leopard. I know the Tamiya is like this it is rather expensive and my modeller skills are not really up to one of those. I'm getting old and fingers no longer work as well as they used to!
Yes the track recoil can be turned off so only gun recoil remains active.
Re: IBU 2 recoil/gun flash issue
Posted: Sun Aug 13, 2017 8:56 am
by Tankbear
Ferny wrote:It's taigen
Sent from my SM-G930F using Tapatalk
The IBU2 triggers the flash, IR and recoil/airsoft all at the same time. The taigen recoil requires power to the motor to power it forward until it gets to a point then the spring fires it backwards, so the delay is this. Try adjusting the stop limit on the recoil so the recoil is closer to the spring point which will descrease the motor time and delay. Other things to check is the motor under powered, i.e. Flat battery, high resistance wiring or connections (bad solder joint) or even a dud motor.