Which tamiya kit is best for a beginner

Feel free to discuss anything and everything to do with tanking here!
User avatar
tomhugill
Captain
Posts: 4851
Joined: Thu Apr 15, 2010 11:21 am

Re: Which tamiya kit is best for a beginner

Post by tomhugill »

JohnWhyte wrote:I'm not bothered about being accurate as long as it looks like one
Apart from the turret the Tamiya ones completely wrong.
JohnWhyte
Corporal
Posts: 472
Joined: Tue Oct 04, 2016 7:20 pm
Location: Scunthorpe UK

Re: Which tamiya kit is best for a beginner

Post by JohnWhyte »

Yeah but when you do a basic firefly conversation with the heng log sherman there are none accurate parts so I don't mind as it will look like one plus some of them had welded hulls plus when you get storage on it you won't tell as much
Attachments
IMG_20170601_091409.jpg
IMG_20170601_091409.jpg (56.29 KiB) Viewed 1369 times
T-34
2 Pz.4
Korean Pershing
2 M50
2 M51
M1
2 King Tiger
2 Jagdpanzer E75
Alligator
E25 Ausf D
E75
E50
T32
Radar Panther
JohnWhyte
Corporal
Posts: 472
Joined: Tue Oct 04, 2016 7:20 pm
Location: Scunthorpe UK

Re: Which tamiya kit is best for a beginner

Post by JohnWhyte »

Plus I can change the engine deck with a 3D printed one
https://www.shapeways.com/product/58V8H ... d=56110425
T-34
2 Pz.4
Korean Pershing
2 M50
2 M51
M1
2 King Tiger
2 Jagdpanzer E75
Alligator
E25 Ausf D
E75
E50
T32
Radar Panther
deathrawt
Private
Posts: 66
Joined: Tue Oct 06, 2015 8:18 pm

Re: Which tamiya kit is best for a beginner

Post by deathrawt »

My first Tamiya build was the pershing and its a fantastic kit!
Its also reasonably priced too
seekaliao
Recruit
Posts: 48
Joined: Sun May 14, 2017 8:09 am

Re: Which tamiya kit is best for a beginner

Post by seekaliao »

My first Tamiya kit is the Tiger 1.

I have yet to finish it, just started. But its surprisingly easy to build. Way easier than static models. Many parts are screwed rather than glued. Being 1/16 means everything is much bigger, do not need to deal with small fragile looking parts.

There only 2 problems I can think of. First would be having to mess a bit with the electronics. Those who have absolutely zero electronics knowledge might might connecting all the wires a little more challenging. Its more complicated than Heng Long one.

Another is despite its price, it does not come with a remote control. So you have to spend spend more money on a controller and receiver unit. I myself have no knowledge about transmitter/receiver so I have no idea which one to use (I have only played with mini-z RC in my life and the only brand I heard of is Futaba.) The manual only shows those units requiring crystals. After searching the internet, then I found out that 2.4GHz ones will work fine as well.
User avatar
silversurfer1947
Lieutenant
Posts: 3337
Joined: Tue Oct 27, 2015 9:54 pm
Location: Bristol, UK

Re: Which tamiya kit is best for a beginner

Post by silversurfer1947 »

I'm not an expert, but would say a 6 channel 2.4Ghz is the minimum you should be looking at. I use a FlySky i6, which can control up to 20 different tanks. Then all you need to buy for each new tank is a receiver. Note that, however, you can not use any third party Tx with Heng Long, Taigen or Torro tanks unless you change the supplied electronics.
Richard
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest! :D
Post Reply

Return to “General Discussion”