Page 2 of 5

Re: hl walker bulldog on the way

Posted: Wed Dec 30, 2015 6:25 pm
by igotit
Max-U52 wrote:Denzil, that's a clark TK22 in the bulldog, and yes, the quads came from one of my Torro M16 halftracks. I think Commander Bob has just the quads available if you need them.

Igotit, those are metal tracks as this is the Taigen model, but I also have the HL M41 and that has plastic tracks and GBs and I gave it to my nephew, who beats the crap out of it and it's still running strong after two years.
Thats very good info to know....thanx

Re: hl walker bulldog on the way

Posted: Thu Jan 07, 2016 4:04 am
by igotit
she arrived yesterday,put 4 runs on her.

heres what i like
plenty power with factory gearbox,creeps very slowly,decent speed.this tank is the right size i was looking for.
i like the steering modes.if you just steer from a stop she will spin both tracks in opposite directions.if you creep and steer,just 1 track spins.

things i dont like
if your going slow and steer left,she steers right and gains speed for 1 second before steering left.
anything over 1/3 throttle she steers fine.

Re: hl walker bulldog on the way

Posted: Thu Jan 07, 2016 12:16 pm
by ALPHA
You really finally got it :D ...so glad to hear that you Like it ;)


ALPHA

Re: hl walker bulldog on the way

Posted: Thu Jan 07, 2016 6:31 pm
by igotit
I like it,steering issue aggrevating....besides that im good.
Ill post up in heng long.
Im assuming its the reciever control unit.

Re: hl walker bulldog on the way

Posted: Thu Jan 07, 2016 7:52 pm
by ALPHA
Is yours the 2.4 version?....If not...does your controller have trims....found messing with the adjustments helped quite a bit in slow maneuvering ....The downside is I'm pretty sure HL removed the trim on the later models ...on the second gen 2.4 they are gone also...interestingly enough...they put one back on the 3rd gen 2.4
really sensitive....but on the M1 it helps a lot.... ;)

ALPHA

Re: hl walker bulldog on the way

Posted: Thu Jan 07, 2016 9:26 pm
by igotit
Only the steer has trim,other trims are non movable.
Its sensitive indeed.
Yes its 2.4 model

Re: hl walker bulldog on the way

Posted: Thu Jan 07, 2016 9:48 pm
by Max-U52
Have you hung a bucket on it yet?

Re: hl walker bulldog on the way

Posted: Fri Jan 08, 2016 12:59 am
by igotit
Do you mean a scale bucket...lol.....no

Re: hl walker bulldog on the way

Posted: Fri Jan 08, 2016 1:12 am
by igotit
ALPHA wrote:Is yours the 2.4 version?....If not...does your controller have trims....found messing with the adjustments helped quite a bit in slow maneuvering ....The downside is I'm pretty sure HL removed the trim on the later models ...on the second gen 2.4 they are gone also...interestingly enough...they put one back on the 3rd gen 2.4
really sensitive....but on the M1 it helps a lot.... ;)

ALPHA
Ive played with the trim....big improvement....thanx.
I was about to order another mfu or an upgrade...lol

Re: hl walker bulldog on the way

Posted: Sun Jan 10, 2016 7:27 pm
by igotit
heres the steering issues
playing with the trim helps

https://www.youtube.com/watch?v=7pkH989 ... e=youtu.be