1:2 scale drivable KV-2 (Cancelled) :(

Post all your larger scale RC Tanks, Half Tracks and Military Vehicles, build threads here. From 1/12 all the way up to 1/4! all here! Your Larger Scale figures are also welcome here.
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: 1:2 scale drivable KV-2

Post by ALPHA »

Hi there Gigs... that's a tough question...not knowing overall weight you will be moving....I would be guessing ...but two washing machine motors at least... :think:

ALPHA
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: 1:2 scale drivable KV-2

Post by Giganaut »

ALPHA wrote:Hi there Gigs... that's a tough question...not knowing overall weight you will be moving....I would be guessing ...but two washing machine motors at least... :think:

ALPHA
i'll try to calculate all the weight from the plywood, metal framing, suspension sets and internal parts

my rough estimate would be around probably less than 1/2 a ton. i might be wrong.
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: 1:2 scale drivable KV-2

Post by ALPHA »

Hey there again Gigs...maybe this will help...saw this video on Youtube awhile ago
1https://www.youtube.com/watch?v=hlUbZhsxcWI
2https://www.youtube.com/watch?v=9mg6hJ-Re9A
3https://www.youtube.com/watch?v=dhBcN2V9WDU
4https://www.youtube.com/watch?v=BWHAfaC-pPg
Sounds like the guy doesn't recommend electric motors for building one of these...he used a gas powered engine from what sounds
like one of those ride along lawn mowers ...then attached the drive by chains and belts

His build is smaller than yours...so there might be some wisdom in what he has to say...looks like he's built a few...there's more videos of other tanks
he's built ;)
Here's his M60
https://www.youtube.com/watch?v=CX28Fwa5nI4

ALPHA
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: 1:2 scale drivable KV-2

Post by Giganaut »

unfortunately i am forced to drop the project... too many red tapes and "sanctions" needed to be made...
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Re: 1:2 scale drivable KV-2

Post by jackalope »

Red tape and sanctions? Where do you, communist China? :haha: Thats too bad it would have been really cool for you to have built this monster.
User avatar
wibblywobbly
Major
Posts: 6395
Joined: Fri Oct 17, 2008 9:30 am
Location: South Wales Valley
Contact:

Re: 1:2 scale drivable KV-2

Post by wibblywobbly »

Just put a rotating blade under the hull, no one can argue with what it is then. :P
Tiger 1 Late
Panther G
King Tiger
M36 B1
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: 1:2 scale drivable KV-2

Post by Giganaut »

jackalope wrote:Red tape and sanctions? Where do you, communist China? :haha: Thats too bad it would have been really cool for you to have built this monster.
Brunei Darussalam actually. government dont like people building "weapons" but it could be permitted if done with proper research and presentation of what will the purpose be to have and build one of these, and to have something different than quad bikes dominating beaches.
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: 1:2 scale drivable KV-2

Post by Giganaut »

Kiaser wrote:To many sanctions call it a ride on mower with benefits there is always a way around things :D

It has a lot of safety features built into this unit it is safe from flying debris :thumbup:

that even i incorporated into the design, safety harnesses, vision ports and 360 degree view screens, indicator lights, convoy lights, even a killswitch and fire extinguisher kit in the engine compartment and a firewall to separate the driver and the engine and transmission
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Re: 1:2 scale drivable KV-2

Post by jackalope »

A "weapon", were you planning on it being able to fire?
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: 1:2 scale drivable KV-2

Post by Giganaut »

jackalope wrote:A "weapon", were you planning on it being able to fire?
well my first idea was like a mechanized laser tag with a barrel recoil servo to emulate barrel recoil, a friend suggested that it could fire tennis balls but at a regulated strength, weak enough that it will not cause any bruising when accidental hitting a person.
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Post Reply

Return to “Larger Scale Military”