monster challenge!
Re: monster challenge!
also with that T-34's driving gear on the monster with its weight... also noted that the Chieftain explained in his T-34-85 review. anything exceeding 40 or was it 45 tons, the track guides would just snap.
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
- jackalope
- Lieutenant
- Posts: 3882
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: monster challenge!
Giganaut wrote:all in all, who would voulenteer in building this beast in 1:16 scale XDD
Good Lord if anyone did it'd be like 4-4.5 feet long! How would it even turn? I'm sure it would throw tracks like crazy.
Re: monster challenge!
this thing would need a differential to level each track's speed. although with this size, you'd have the turning radius of jupiter XDjackalope wrote:Giganaut wrote:all in all, who would voulenteer in building this beast in 1:16 scale XDD
Good Lord if anyone did it'd be like 4-4.5 feet long! How would it even turn? I'm sure it would throw tracks like crazy.
which in the proposal it had like 5 drivers, 1 master and 4 slave drivers
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: monster challenge!
:
...Sounds like if they did build the real tank... it would wreak havoc probably destroy some buildings roads ..who knows what else
Might be a fun build though...but where the heck would you store it
ALPHA
Giganaut wrote:
this thing would need a differential to level each track's speed. although with this size, you'd have the turning radius of jupiter XD
which in the proposal it had like 5 drivers, 1 master and 4 slave drivers




Might be a fun build though...but where the heck would you store it

ALPHA
Re: monster challenge!
ALPHA wrote:![]()
![]()
...Sounds like if they did build the real tank... it would wreak havoc probably destroy some buildings roads ..who knows what else
![]()
Might be a fun build though...but where the heck would you store it![]()
ALPHA
it would leave trenches in its wake, also for the scaled size version. you can use the garage spot where the car is supposed to be XD and in 1:16 , total length of the beast is 1.340m / 4ft 43?4in
in 10 scale, 2.145m and i'd like to see Armortek would do a stunt in building these beasts XDD
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: monster challenge!
Makes you wonder why they didn't put a catapult on it an launch aircraft
ALPHA

ALPHA
Re: monster challenge!
well i did make another variant with katyusha racks at the backALPHA wrote:Makes you wonder why they didn't put a catapult on it an launch aircraft![]()
ALPHA

Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
- jackalope
- Lieutenant
- Posts: 3882
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: monster challenge!
Just realized this wouldn't work for parades either. It would destroy the roads with its weight not to mention trying to get it to go around a street corner! Then there would be the issue of weather or not the streets were wide enough.
Re: monster challenge!
Lucky they didn't have helicopters back then.... they could fit what...maybe two on the back of itGiganaut wrote:well i did make another variant with katyusha racks at the backALPHA wrote:Makes you wonder why they didn't put a catapult on it an launch aircraft![]()
ALPHA
Over designed tanks are spooky lol

ALPHA
Re: monster challenge!
yup. tell me about it...
like this one here:

like this one here:

Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)