Page 2 of 2
Re: Problems with a heng long king tiger
Posted: Sun Sep 07, 2014 10:01 pm
by ALPHA
Rocketman62 wrote:Hi, I have a King Tiger with a Porsche turret. It's the BB version but does not work at all, I have taken the upper hull off and noticed two wires with connectors coming from the BB unit that are not attached to anything!! They consist of two wires and three wires, can anyone tell me where they connect to or where to look to solve the problem.
Thanks
The wires could be for the recoil sensor for the sound/gearboxes...it usually is soldered to a micro switch... though it's hard to say... you got any photos Rocketman?
ALPHA
Re: Problems with a heng long king tiger
Posted: Mon Sep 15, 2014 9:45 pm
by Lord Haw-Haw
Zmader22 wrote:Just bought a king tiger and right out of the box the gun will not fire the bb's tried everything and can't fined a diagram to take it apart I can c all the screws just alittle worried about taken it apart so the ? Is is there any diagrams for taken it apart to solve the problem any any suggestions
Any updates on your beast?
Here's update on my KT.
For anyone wanting their L/71 too kick-ass.
Resleeved with a 6.03mm brass barrel, lathed on drill press for proper taper and airsoft fit, same length as original.
New Taigen shooting unit.
Used a press-fit/glued on Taigen brass muzzle break (didn't need too thread the end).
Results are: flat trajectory out to 25-30ft!, straight as an arrow! Best shooter I've got! The L/71 is still king!
Re: Problems with a heng long king tiger
Posted: Tue Sep 16, 2014 12:31 am
by ALPHA
Lord Haw-Haw wrote:Zmader22 wrote:Just bought a king tiger and right out of the box the gun will not fire the bb's tried everything and can't fined a diagram to take it apart I can c all the screws just alittle worried about taken it apart so the ? Is is there any diagrams for taken it apart to solve the problem any any suggestions
Any updates on your beast?
Here's update on my KT.
For anyone wanting their L/71 too kick-ass.
Resleeved with a 6.03mm brass barrel, lathed on drill press for proper taper and airsoft fit, same length as original.
New Taigen shooting unit.
Used a press-fit/glued on Taigen brass muzzle break (didn't need too thread the end).
Results are: flat trajectory out to 25-30ft!, straight as an arrow! Best shooter I've got!
The L/71 is still king!

...................
ALPHA