It's not dirty !............ 
............... 
Beautiful job Scalawag
ALPHA
Tger I outdoors
Forum rules
If you're planning on posting a log of your build please use the relevant build sections.
If you're planning on posting a log of your build please use the relevant build sections.
Re: Tger I outdoors
It's not dirty !............ ............... Beautiful job Scalawag
ALPHA
-
doc larsson
- Staff Sergeant
- Posts: 829
- Joined: Sat Sep 29, 2012 5:05 pm
Re: Tger I outdoors
lovely scala !
-
cannedheat
Re: Tger I outdoors
hi paul
no I would not have recognised her, but you haven't done much to spray job have you , yes it looks a cool KITTY lets have looksy inside at some point .wot wot
no I would not have recognised her, but you haven't done much to spray job have you , yes it looks a cool KITTY lets have looksy inside at some point .wot wot
-
scalawag
Re: Tger I outdoors
Hi Canned,
No I have not done too much with the paintwork which you did as I thought it looked great.
I have repainted the top deck of the upper hull due to all the extras I have put on, engine grills, replaced the moulded on tools etc.... She has had a couple of dark filters to tone in the paintwork and a set of peddinghaus Decals.
Various detail bits added and the wheels and tracks are new metal ones.
As to the insides, your wish is my command
As you can see I have made a few internal changes.
The Exhausts are now plumbed through the exhaust stacks.
It has an uprated volume control, which if all goes well I will be exchanging at some point soon for an RC Tanks Australia "viper" board which will enable me to control the volume from a pot on my Tx. I have two of these in the post to me at the moment.
IBU2 main board fitted and gun flash changed to LED (I think I prefer the LED flash to the Hi Intensity one now). Main switch changed to a toggle switch (I just prefer these over slide switches) and no need for a smoker switch anymore due to the IBU2.
4-1 taigen black steel gearboxes. Brace added to the front of the hull for extra rigidity.
I think that covers the changes
Paul
No I have not done too much with the paintwork which you did as I thought it looked great.
I have repainted the top deck of the upper hull due to all the extras I have put on, engine grills, replaced the moulded on tools etc.... She has had a couple of dark filters to tone in the paintwork and a set of peddinghaus Decals.
Various detail bits added and the wheels and tracks are new metal ones.As to the insides, your wish is my command
As you can see I have made a few internal changes.
The Exhausts are now plumbed through the exhaust stacks.
It has an uprated volume control, which if all goes well I will be exchanging at some point soon for an RC Tanks Australia "viper" board which will enable me to control the volume from a pot on my Tx. I have two of these in the post to me at the moment.
IBU2 main board fitted and gun flash changed to LED (I think I prefer the LED flash to the Hi Intensity one now). Main switch changed to a toggle switch (I just prefer these over slide switches) and no need for a smoker switch anymore due to the IBU2.
4-1 taigen black steel gearboxes. Brace added to the front of the hull for extra rigidity.
I think that covers the changes
Paul
-
cannedheat
Re: Tger I outdoors
paul
looks the part ,nice tidy ,sounds the part , not only that if the mad boys pass comment to, well what can one say ,wot wot ,[bits arrived ]
looks the part ,nice tidy ,sounds the part , not only that if the mad boys pass comment to, well what can one say ,wot wot ,[bits arrived ]
-
cannedheat
Re: Tger I outdoors
if you are thinking of doing 131 I have lots of photos if req for reference wot wot ......
-
scalawag
Re: Tger I outdoors
Thanks Canned, I might just take you up on that offer. Glad the bits arrived safelycannedheat wrote:if you are thinking of doing 131 I have lots of photos if req for reference wot wot ......
-
scalawag
Re: Tger I outdoors
Quick update.
The Viper remote volume control units which I ordered from RC Tank Australia arrived today 
These allow the sound volume to be controlled from the Tx via a rotary pot. The viper just plugs into the volume control socket on the board and a spare channel on the Rx. Set up a rotary pot on the Rx channel and away you go. Works a treat on my Turnigy 9x setup.
Here is a pic of this Late Tiger I showing the revised internal layout. No more volume pot in the hull, and the Viper is the small board near the large blue capacitor at the top of the picture.
The Viper remote volume control units which I ordered from RC Tank Australia arrived today
These allow the sound volume to be controlled from the Tx via a rotary pot. The viper just plugs into the volume control socket on the board and a spare channel on the Rx. Set up a rotary pot on the Rx channel and away you go. Works a treat on my Turnigy 9x setup.
Here is a pic of this Late Tiger I showing the revised internal layout. No more volume pot in the hull, and the Viper is the small board near the large blue capacitor at the top of the picture.
-
cannedheat
Re: Tger I outdoors
scalawag
this is all to much for me, just learnt how to put a fuse in a 13 amp plug last week looks good nice and tidy [what did you do with the plastic road wheels]
this is all to much for me, just learnt how to put a fuse in a 13 amp plug last week looks good nice and tidy [what did you do with the plastic road wheels]
Re: Tger I outdoors
That is a very nice installation Scalawag,
Can you tell me a bit more about the smoker unit?
Best Regards
Keith.
Can you tell me a bit more about the smoker unit?
Best Regards
Keith.
