Page 2 of 11

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 12:57 am
by palepainter
This is the best reference I could find for those circular marks on the hull.
Image

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 1:00 am
by palepainter
One more....

Image

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 1:22 am
by PainlessWolf
Good Evening,
Here is something from the Prime Portal site. It's not a pretty tank but there are some good close-ups.
http://www.primeportal.net/tanks/dmitry_kiyatkin/kv-1/
regards,
Painless

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 1:39 am
by palepainter
Thanks. I have been using this page as a reference. I have not been able to find any thing better than this one on the site, but the front section on the model does not have the circular marks that the real KV1 has.
Image

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 2:52 am
by dgsselkirk
Something that caught my eye right away is that the horn on the HL is on the wrong side...
http://data3.primeportal.net/tanks/dmit ... of_130.jpg
http://data3.primeportal.net/tanks/dmit ... of_130.jpg

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 3:04 am
by palepainter
dgsselkirk wrote:Something that caught my eye right away is that the horn on the HL is on the wrong side...
http://data3.primeportal.net/tanks/dmit ... of_130.jpg
http://data3.primeportal.net/tanks/dmit ... of_130.jpg

Yes. That is something I discovered doing my research on the bracket. I decided not to mess with the horn at this point.

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 9:16 am
by blimp
Good morning fellas ,Great stuff ! Have you seen these sites - Model development = http://www.armchairgeneral.com/forums/s ... hp?t=77660 Lots of photo's etc. = http://www.kv1ehkranami.narod.ru/index.html , Niel Stokes = http://www.4bogreen.com/kv-series , and for surviving vehicles ( not just KV's )= http://legion-afv.narod.ru/KV.html . Btw , those 'rings' - the armour was initially screwed together prior to final welding .

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 11:36 am
by ALPHA
palepainter wrote:Alpha,
Do you have a link to those hatches?
Here you go Pale.... I also just found out Dave has the tool boxes as well
http://www.ebay.co.uk/itm/Mato-KV1-Meta ... 58a864d47e
Image
Image
but they aren't listed

ALPHA

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 11:40 am
by ALPHA
dgsselkirk wrote:Hey Palepainter, mine went on the bench on Thurs. :thumbup: My guts are all done with Clark and servo recoil so it was time to detail too! Will follow what you are doing. Good timing eh? :haha:
:haha: You doing one too dgsellkirk?.... I just finished my turret....nothing special... but it's there lol

ALPHA

Re: KV-1 on the bench

Posted: Mon Dec 02, 2013 11:42 am
by ALPHA
palepainter wrote:
dgsselkirk wrote:Something that caught my eye right away is that the horn on the HL is on the wrong side...
http://data3.primeportal.net/tanks/dmit ... of_130.jpg
http://data3.primeportal.net/tanks/dmit ... of_130.jpg

Yes. That is something I discovered doing my research on the bracket. I decided not to mess with the horn at this point.
Really... everything I've found has the horn is right were it should be... except in most photo's it's busted off ...even the instruction sheet that came with the resin turret has the horn and the light in that location

ALPHA