Jagdpanther side skirts?
Jagdpanther side skirts?
I just got Tank Modellbau side skirts for the Jagd. and would anyone have instructions on how they attach. No instructions with the skirt when they came. Any help with that so I don't screw it up would be great. Thanks for your help. Shotgun
Normal is a cycle on a washing machine
- FireflyKeith
- Warrant Officer 2nd Class
- Posts: 1158
- Joined: Mon Sep 29, 2008 11:12 pm
- Location: Northants, UK
Re: Jagdpanther side skirts?
Have you got a picture of the parts you have
if so im sure we can figure it out, i recently fitted some brass skirts on my Jagdpanther, but i scrapped the fixings they came with and made my own, as the supplied ones were flimsy and would probably have fell off on the first bump
Keith


Keith

Re: Jagdpanther side skirts?
Keith spent sometime before your email looking at photos and parts and finally figured it out. After attaching the right side, I measured the left side starting from the back and attaching one holder at a time to make sure the skirts line up. Taping the whole set and marking positions, leaves a little to much to chance with tape moving and the hole not lining up. Keith thanks for responding, looked at your skirts, your skill is out of my level. Amazing work Keith. Thanks Greg
- Attachments
-
- Heres atop view of it
- _DSC5656.jpg (111.48 KiB) Viewed 356 times
-
- this one shows the skirt gap
- _DSC5655.jpg (105.52 KiB) Viewed 356 times
-
- here is a problem if glue the skirts in place I can't work on the wheels if I need to. If I don't as you can see they fall off very easy. Any suggestions for attaching them, but still get them off?
- _DSC5649.jpg (110.5 KiB) Viewed 356 times
-
- here an image with tank on hull with skirts on
- _DSC5648.jpg (102.83 KiB) Viewed 356 times
-
- holders in place
- _DSC5644.jpg (128.05 KiB) Viewed 356 times
-
- I used clips to hold in place and glue them in place
- _DSC5643.jpg (84.15 KiB) Viewed 356 times
-
- taped the skirts, then placed on the side and marked the skirt holder positions.
- _DSC5647.jpg (104.5 KiB) Viewed 356 times
Normal is a cycle on a washing machine