By a miracle does anyone still have the wiring diagram for this rx board?
A photo or a detailed diagram would be greatly appreciated and run my rc tank again!
Thank you!!!
HELP WSN RX Board wiring diagram
HELP WSN RX Board wiring diagram
I recently dug-up my old rc tanks and found my WSN T34 with the wirings torn up.
By a miracle does anyone still have the wiring diagram for this rx board?
A photo or a detailed diagram would be greatly appreciated and run my rc tank again!
Thank you!!!
By a miracle does anyone still have the wiring diagram for this rx board?
A photo or a detailed diagram would be greatly appreciated and run my rc tank again!
Thank you!!!
1:16 M2A2 Bradley, M5A1 Stuart, 3D Printed 1/16 M551 Sheridan, MT-LB, 1/18 PBR Mk2
-
Jofaur86
- Warrant Officer 1st Class
- Posts: 2192
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: HELP WSN RX Board wiring diagram
Hello, 
Hello,
Personally, it's going to be difficult and must be at a 27 MHz frequency. Personally, I would replace the whole thing with a Heng Long or Taigen system at 2.4 GHz. Attached is a complete receiver, transmitter, and speaker set for a good price. There will certainly be some wiring to redo, but no more than with the old board. It's up to you.
https://www.rctank.de/Taigen-kit-comple ... pour-chars
Hello,
Personally, it's going to be difficult and must be at a 27 MHz frequency. Personally, I would replace the whole thing with a Heng Long or Taigen system at 2.4 GHz. Attached is a complete receiver, transmitter, and speaker set for a good price. There will certainly be some wiring to redo, but no more than with the old board. It's up to you.
https://www.rctank.de/Taigen-kit-comple ... pour-chars
