Suspension adjust on T-34 Heng Long

[rcwars]

Hi, If someone needs to adjust suspension on T-34 Heng Long. To look more real and make it sensitive, here is the video:

https://youtu.be/4_AoUxWdGSw?si=MKhOxEQ5j2dBiT3M

[RobW]

I've done something similar but without altering the springs. The main issue is then track tension - there's not enough slack to remove a link so they skip. Fixable with aftermarket adjuster but I couldn't be bothered.

[rcwars]

Did you try adjuster on front wheel which is already on model?

[HERMAN BIX]

I also have done a similar mod, and clocked the springs to soften the middle ones.
I leave the rear spring firm as the rear mounted gearbox on the T34 causes sag over time.

[RobW]

Did you try adjuster on front wheel which is already on model?

Didn't think there was one on the older HL? I'd better have a closer look.

[HERMAN BIX]

None on the older ones.
I think that idea kicked in on the recent V7's

[Stormbringer]

My circa 2018ish Taigen t34 has an adjuster on the front idlers

[HERMAN BIX]

My circa 2018ish Taigen t34 has an adjuster on the front idlers

Jeez!!??

On a 5.3 ?

[Stormbringer]

I dont know what board it is but its same tx as my 2016 panther

[Stormbringer]

Heres a picture of tx and mfu
It is the metal plastic version and is how came out box

20251122_124818.jpg (1.11 MiB) Viewed 31 times