Hi. I have a HL v7 Panther.. I recently watched a video where they had fitted a bearing set up on their idler wheel and drive sprocket wheels. This was to reduce the loading on the axles.
Is this a part that I can buy and fit or was this a custom job..
Many thanks
Bearings
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
-
Gillaspy2005
- Lance Corporal
- Posts: 167
- Joined: Sat Jul 28, 2012 9:36 pm
- Location: Manchester
Re: Bearings
Hi, you can get them at rctank.de
https://www.rctank.de/Jagdpanther-Panth ... ngs-799-mm
Just make sure you get the right diameter. I think these are the right ones however they come in three different sizes. Email then and theyll help you get the right ones. Dominique is very helpful.
They are an excellent addition, will stop wear on your gearboxes, highly recommend them.
Cheers
Dave
Sent from my SM-S938B using Tapatalk
https://www.rctank.de/Jagdpanther-Panth ... ngs-799-mm
Just make sure you get the right diameter. I think these are the right ones however they come in three different sizes. Email then and theyll help you get the right ones. Dominique is very helpful.
They are an excellent addition, will stop wear on your gearboxes, highly recommend them.
Cheers
Dave
Sent from my SM-S938B using Tapatalk
Re: Bearings
Is your panther a pantiger if so that has tiger 1 lower hull and running gear not panther two different tanks
-
HERMAN BIX
- Major-General
- Posts: 11491
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: Bearings
The version you have is a Tiger lower hull.
Tigers are fickle for throwing tracks too .
Tigers are fickle for throwing tracks too .
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: Bearings
Spotted these Henglong Metal Drive Axle Bearings For German Tiger I Tank I RC 6.0 7.0 1/16 3818
Will this fit my Pan Tiger?
Will this fit my Pan Tiger?
- IMG_1417.jpeg (140.48 KiB) Viewed 285 times
Play Hard, Have Fun
-
AlanWhite
- Lance Corporal
- Posts: 130
- Joined: Wed Aug 06, 2025 8:24 am
- Location: Near Edinburgh Scotland
Re: Bearings
the pan tiger is basically a tiger 1 bottom with a diferent deck on top so if they are for a Tiger 1 they should fit
Cheers
Alan
Let slip the cats of war!!!!
Taigen Panther G
Taigen T34/85
Heng Long King Tiger
Heng Long Tiger 1
Alan
Let slip the cats of war!!!!
Taigen Panther G
Taigen T34/85
Heng Long King Tiger
Heng Long Tiger 1
