Pantiger re-build / correction into a Ausf . A

[littletankman]

Hi Gra, Now thats an idea I have had ago but not as you described . So I will try your method thanks .

Andy

[raven]

hi
i was looking in womens shops for chains like you i get the wife to buy them

  chris

[Gra]

Hi Andy
some pics of the track links
also forgot to say had to remove the cleat and move to opp end of the link (with styrene) as they are the back to front to the Tiger link (if that makes sense) I also filled in some of the open hinges with styrene channel to cover the link pin

gra

[littletankman]

Hi have done a little on the block holder. Ive just used nut on the threaded locking bar as  dont have the correct butterfly head . Ive decided its not worth using my Aber tool clamps on this project so Ive just made a simple clip to hold were the clamp would be. I need to add the circules to hold the cable around the block .

Littletankman

[STEINER]

Your doing a sterling job on this Andy. Boy, you have must have put some hours in 

Keep it going.

STEINER

[raven]

hi andy what type of glue are you useing on your tool rack

  chris

[BREL]

a great build, keep the pictures coming

[littletankman]

Hi Steiner,
Thanks for your comments . Yer I'm out of work so I have plenty of time . Although that could change anytime . Good luck with finding a halftrack Ive got to admit I have had my one for ages and there was loads about .

Thanks Andy

[littletankman]

Hi Brel ,
Thanks for the comments . Yer plenty more picts to come .

Thanks Littletankman

[littletankman]

Hi just added the track cable retrainers on the block holder today . Ive cut out the front hatches from styren sheet and made brass  ::) periscope covers ready to fit . Thanks all for the help on my post regarding the track cable.

Littletankman