Every flavour of T-34
-
Raminator
- Warrant Officer 2nd Class
- Posts: 1309
- Joined: Tue Aug 11, 2015 9:57 am
- Location: Newcastle, Australia
Re: Every flavour of T-34
Cheers for the kind words fellas, I appreciate it! Feels good to be getting back into the swing of things again.
Part of winterising the printer involved replacing the PFA film in the vat with ACF, which also allows for much faster printing. A full build plate of 54 track links takes just over two and a half hours, so a full set of tracks only takes about eight hours to print!
Assembling them is the fun part. It took a bit over an hour to do the first one, I'll do the other during the week. I think they'll work great, the resin mix I'm using is very strong. The only issue I can see is that they'll wear faster than plastic tracks would if they were run on rough concrete, but they'll work just fine on grass, dirt or polished concrete. Here's the assembled track holding up an eight kilo kettlebell:
Just need to get the rest of the running gear printed so I can get them on the chassis!
Part of winterising the printer involved replacing the PFA film in the vat with ACF, which also allows for much faster printing. A full build plate of 54 track links takes just over two and a half hours, so a full set of tracks only takes about eight hours to print!
- IMG20240709174153.jpg (346.7 KiB) Viewed 881 times
Assembling them is the fun part. It took a bit over an hour to do the first one, I'll do the other during the week. I think they'll work great, the resin mix I'm using is very strong. The only issue I can see is that they'll wear faster than plastic tracks would if they were run on rough concrete, but they'll work just fine on grass, dirt or polished concrete. Here's the assembled track holding up an eight kilo kettlebell:
- IMG20240709201056.jpg (342.06 KiB) Viewed 881 times
Just need to get the rest of the running gear printed so I can get them on the chassis!
-
Herr Dr. Professor
- Major
- Posts: 5398
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: Every flavour of T-34
Gee, Raminator, that's a lot or trouble just to hold up a weight. 
With all your printing mastery, do you print lenses for headlights of various sizes 
With all your printing mastery, do you print lenses for headlights of various sizes -
Raminator
- Warrant Officer 2nd Class
- Posts: 1309
- Joined: Tue Aug 11, 2015 9:57 am
- Location: Newcastle, Australia
Re: Every flavour of T-34
It would not be my most convoluted, Rube-Goldbergesque solution to a problem! It's not difficult to draw and print different headlight lenses, it's all about having accurate dimensions and good references. If you can send me exactly what you need, I'd be happy to do them for you.
The second track went together much faster than the first, although my side-cutters are definitely worse for wear after doing all of the track pins. There's about five metres of 0.8 mm stainless spring steel between the two tracks. I'm hoping the feeling will return to the tips of my thumbs soon!
Well worth the effort though, I think.
I got some prints of the rest of the running gear done too. I would eventually like to print proper early-pattern tyres for the roadwheels and idlers, but for now the roadwheels are using the Taigen tyres and the idlers are solid prints.
I'm still impressed with what I can get away with on this printer; I thought I was being silly when I got carried away and modelled the castle nuts for the sprocket, but even the split pins printed properly! They're too small to see without magnification, but I know they're there!
I think this about wraps up the development of this particular T-34 variant. I''ll create a new build thread as I continue working on it, and keep this thread for the design of all the different T-34 types.
The second track went together much faster than the first, although my side-cutters are definitely worse for wear after doing all of the track pins. There's about five metres of 0.8 mm stainless spring steel between the two tracks. I'm hoping the feeling will return to the tips of my thumbs soon!
Well worth the effort though, I think. - IMG20240712173458.jpg (336.84 KiB) Viewed 825 times
I got some prints of the rest of the running gear done too. I would eventually like to print proper early-pattern tyres for the roadwheels and idlers, but for now the roadwheels are using the Taigen tyres and the idlers are solid prints.
- IMG20240712173534.jpg (345.48 KiB) Viewed 825 times
I'm still impressed with what I can get away with on this printer; I thought I was being silly when I got carried away and modelled the castle nuts for the sprocket, but even the split pins printed properly! They're too small to see without magnification, but I know they're there!
- IMG20240712173610.jpg (344.13 KiB) Viewed 825 times
I think this about wraps up the development of this particular T-34 variant. I''ll create a new build thread as I continue working on it, and keep this thread for the design of all the different T-34 types.
- IMG20240712174434.jpg (349.78 KiB) Viewed 825 times
-
Marco Peter
- Staff Sergeant
- Posts: 767
- Joined: Mon Jun 05, 2017 10:18 pm
- Location: The Netherlands
Re: Every flavour of T-34
Will you paint and weather it? It's superb!
1:16 was my scale. Until 'Konan' came into my life... an Armortek 1:6 Tiger 1!
... Now followed by a Panther G, 'Gunther'!
I'm a happy man.
... Now followed by a Panther G, 'Gunther'!
I'm a happy man.
Re: Every flavour of T-34
An early T34 conversion isn't easy, but you are definitely making it happen. The early tracks really complete the look.
Derek
Too many project builds to list...
Too many project builds to list...
-
ColemanCollector
- Warrant Officer 2nd Class
- Posts: 1103
- Joined: Sat Jan 14, 2023 8:50 pm
- Location: Ontario, Canada
Re: Every flavour of T-34
Stunning. Stunning. STUNNING!
Headlight lens, turret, early tracks...LUCKY!
Mike.
Headlight lens, turret, early tracks...LUCKY!
- napoleon-dynamite-shocks.gif (2.3 MiB) Viewed 790 times
Elbows up
-
Herr Dr. Professor
- Major
- Posts: 5398
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: Every flavour of T-34
"If you can send me exactly what you need, I'd be happy to do them for you." I have made a note of this, Raminator. Of course, I do not expect you to do any for me for free. I will be busy for a while, but I will PM when I have some specific sizes figured out.
-
Raminator
- Warrant Officer 2nd Class
- Posts: 1309
- Joined: Tue Aug 11, 2015 9:57 am
- Location: Newcastle, Australia
Re: Every flavour of T-34
I appreciate the kudos gents, I'm flattered that you all like it!
Yep, it'll get a separate build thread to go over the construction, electronics, painting and weathering. I've just been finalising some dimensions for all of the stowage and fenders this weekend, so I should be able to get on to the final assembly soon!
Not a problem, Herr Doktor. I don't work quickly, but I do work cheap!Herr Dr. Professor wrote: ↑Fri Jul 12, 2024 9:51 pm "If you can send me exactly what you need, I'd be happy to do them for you." I have made a note of this, Raminator. Of course, I do not expect you to do any for me for free. I will be busy for a while, but I will PM when I have some specific sizes figured out.
-
blimp
- Sergeant
- Posts: 727
- Joined: Sat Dec 11, 2010 12:29 am
- Location: Watford , NW Londonistan . U.K.
Re: Every flavour of T-34
Wow , this is gorgeous Raminator , will you be doing parts ? - Such as a set of those tracks , err , just asking ,for someone I know . 
B.
to the bouncy room ! Yay !
