To paint a 1/6 RC tank do you recommend putting everything together first to check if everything works, then dismantling everything, painting and putting everything back together? (especially for the wheels) or paint everything before assembly? And What glue should I use for assembly a 3D printing tank? cyano ? Epoxy?
Thanks for your answers
1/6 tank painting
Re: 1/6 tank painting
On a 1/6 tank, I'd always suggest dry building first to make sure everything fits, and then dismantle although you could prime the components first. Paint the wheels and chassis and other inaccessible parts before assembly but paint camo on when chassis, deck and turret are together. Then paint tools etc and add on. At least that's the way I do it. I haven't done much 3D printed stuff but used epoxy when I have which seems to work ok. Others may have more experience with different adhesives.
Re: 1/6 tank painting
Ok thanks for your advises Jimmic !
Re: 1/6 tank painting
Adhesive choices for 3D printed parts depends on what the filement is. PLA, ABS and ASA can be put together with a normal polystyrene solvent like Plastic Weld, but PETG needs something more agressive like MEK or acrylic glues.
- tankme
- Warrant Officer 1st Class
- Posts: 1995
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: 1/6 tank painting
Personally I like to completely build a tank, do a functions check, and then I break it down for painting. Rarely I will paint the wheels and then put the rubber one before finishing the tank, but I'm one of those that hates painting so I like to get it all over with in one go. I picked up a small automotive type 4oz spray gun to paint my larger 1/10th and 1/6th scale tanks. No way I'm going to airbrush an entire 1/6th scale tank. I will probably use the airbrush for the camo pattern on the 1/10th Jagdtiger though. The base coat will go down with the larger spray gun. Primer on my larger models is usually rattle can I don't like painting throughout the build in case I need to glue additional stuff later. Glue don't like paint in the way and I'm too lazy to sand it off before gluing...
Derek
Too many project builds to list...
Too many project builds to list...
Re: 1/6 tank painting
Thanks for your answers gentlemen ; and yes i will probably paint the large surfaces with large spray gun and finish cammo details with airbrush...