FLYSKY FS I6S

[Jaberwocky]

I have an i6s that is only about 3 months old.
when it arrived I was able to get into the settings via the touch screen and set up the channels for the clark board and pair the RX.
I have now found that I need to reverse the throttle channel.
However I cannot access the TX via the touch screen.
nothing happens when I touch the lock button.

Is it now a brick or is there a work around

many thanks for your help

[tomhugill]

I've had this happen on a couple of mine, some times it's the cable.for the screen isnt seated right if it's been dropped. On my other happened for no reason I could see and is only useful for what ever model it's been bound too

[tankme]

Are you holding the lock button for like few seconds? There is a setting that sets how long the lock button needs to be pressed before it releases.

[Jaberwocky]

thanks for replies,
Yes holding for quite some time and no response

will have check on the cables