I have an i6s that is only about 3 months old.
when it arrived I was able to get into the settings via the touch screen and set up the channels for the clark board and pair the RX.
I have now found that I need to reverse the throttle channel.
However I cannot access the TX via the touch screen.
nothing happens when I touch the lock button.
Is it now a brick or is there a work around
many thanks for your help
FLYSKY FS I6S
Re: FLYSKY FS I6S
I've had this happen on a couple of mine, some times it's the cable.for the screen isnt seated right if it's been dropped. On my other happened for no reason I could see and is only useful for what ever model it's been bound too
- tankme
- Warrant Officer 1st Class
- Posts: 2001
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: FLYSKY FS I6S
Are you holding the lock button for like few seconds? There is a setting that sets how long the lock button needs to be pressed before it releases.
Derek
Too many project builds to list...
Too many project builds to list...
-
- Recruit
- Posts: 10
- Joined: Mon Dec 11, 2023 11:46 am
Re: FLYSKY FS I6S
thanks for replies,
Yes holding for quite some time and no response
will have check on the cables
Yes holding for quite some time and no response
will have check on the cables