Help with Leopard 2A6 barrel Tilt reloading
Re: Help with Leopard 2A6 barrel Tilt reloading
Rat, Bix, well I was sure enjoying the torment!
"Don't believe everything you see on the internet" - George S. Patton
Eric
Eric
-
fullysemiautomatic
- Recruit
- Posts: 6
- Joined: Mon Jan 08, 2024 4:59 am
Re: Help with Leopard 2A6 barrel Tilt reloading
I have the Heng Long 7.1 for the leopard. I don't think it's a controller setting. Has anyone done a mod where it shoots bbs and tilts?
-
Meter rat
- Warrant Officer 1st Class
- Posts: 1916
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Help with Leopard 2A6 barrel Tilt reloading
Meter rat wrote: ↑Wed Jan 10, 2024 7:20 am I saw your question on the other forum. As the Leopard is manually loaded this function is not required. I would think, if you really want it to do this functionality, after all it is your tank, then I would think you would need to remove the elevation unit, and replace it with a servo, connected to the existing BB unit. I have the 7.1 MFU, which I am just installing into a T72 which does require this function. This is the only advice I can help with. Like a lot on here, someone will work out a solution, or will have worked out a solution, and pass on how to do it. Like wise if you find a solution, please pass it over.
You don’t get wiser as you get older. You just run out of stupid things to do.
-
Meter rat
- Warrant Officer 1st Class
- Posts: 1916
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Help with Leopard 2A6 barrel Tilt reloading
Sorry I do not know what happened to what I was posting. I will sort later.
You don’t get wiser as you get older. You just run out of stupid things to do.
-
Meter rat
- Warrant Officer 1st Class
- Posts: 1916
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Help with Leopard 2A6 barrel Tilt reloading
Having just read the instructions for my 7.1. Bearing in mind mine is new to me as well and as it is not in a tank, I haven’t be able to try it. Have you tried pressing button K and moving control stick 2 up?
You don’t get wiser as you get older. You just run out of stupid things to do.
-
HERMAN BIX
- Major-General
- Posts: 11905
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: Help with Leopard 2A6 barrel Tilt reloading
Line 24 in the instructions...................
Mr FSA, have you read the instructions and understood what the settings are on the 7.1 not the 7.0 the 7.1 ?
Have you tried to follow them and interpret the result & try again ?
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
-
Meter rat
- Warrant Officer 1st Class
- Posts: 1916
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Help with Leopard 2A6 barrel Tilt reloading
- CD289BF1-DBC3-4DF3-BD83-8FEB85209D2E.jpeg (126.67 KiB) Viewed 107778 times
You don’t get wiser as you get older. You just run out of stupid things to do.
-
Meter rat
- Warrant Officer 1st Class
- Posts: 1916
- Joined: Wed Aug 05, 2020 7:33 pm
- Location: By the sea in Argyle and Bute
Re: Help with Leopard 2A6 barrel Tilt reloading
Having just set up my TK7.1 I can now confirm that the barrel tilt works off servo only, and not with the standard unit. So Mr SFA you will need to make the elevation work off a servo I can confirm that pressing button K and moving control stick 2 up switches the facility on and off.
You don’t get wiser as you get older. You just run out of stupid things to do.
